Engine Oil Cooler - Disassemble
Start By:
- Remove engine oil cooler.
Show/hide table
| NOTICE |
|---|
|
Inspect all O-rings, seals, and gaskets for wear and damage. Replace if necessary. |
- Remove plug (5), O-ring (4), spring (3), and bypass valve (2) from elbow assembly (1).
Show/hide table
Illustration 2 g06321251 - Remove plugs (6) and (8) and O-rings (7) and (9) from oil cooler assembly (10).
Show/hide table
Illustration 3 g06321270 - Remove 12 bolts (11) and bonnet (12).
- Repeat step 3 on the opposite side.
Show/hide table
| |
| Illustration 1 | g06321248 |
Show/hide table
 |
|
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
Caterpillar Information System:
3500C IMO III Engines Solenoid Valve - Test - Engine
C7.1 (Mechanical) Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
320D3 and 323D3 Excavators Machine System Specifications Bucket Linkage - B1 Family
C7.1 (Mechanical) Engines for Caterpillar Built Machines Flywheel - Install
C7.1 (Mechanical) Engines for Caterpillar Built Machines Flywheel - Remove
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankcase Breather - Install
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankcase Breather - Remove
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Engine Supplement Engine - Remove and Install
C175-16 Petroleum Engine Sensor Signal (Analog, Active) - Test
C175-16 Petroleum Engine Injector Solenoid - Test
Rework Procedure for Power Cables on Certain C27 and C32 Generator Sets {4459} Rework Procedure for Power Cables on Certain C27 and C32 Generator Sets {4459}
C175-16 Petroleum Engine Fuel Priming Pump - Test
320D3 Excavators Cooling System Coolant (ELC) - Change
320D3 Excavators Engine Oil Sample - Obtain
3516C IMO III Petroleum Engines Air Starting Motor - Remove
797F Tier 4 Off-Highway Truck Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
Rework Procedure for Solar Charger Wires May be Reversed on Certain Generator Sets {1408, 7556} Rework Procedure for Solar Charger Wires May be Reversed on Certain Generator Sets {1408, 7556}
C175 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Cooler - Assemble
3516C IMO III Petroleum Engines Air Starting Motor - Install
New Oil Gauge is Now Used on Certain C9.3 Machine Engines {1326} New Oil Gauge is Now Used on Certain C9.3 Machine Engines {1326}
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump and Mounting
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump
Improved Switch Assembly for Quick Coupler Is Now Used on Certain 320, 320 GC, and 323 Excavators {1435} Improved Switch Assembly for Quick Coupler Is Now Used on Certain 320, 320 GC, and 323 Excavators {1435}