Improved Bellows Fins and Exhaust Elbows are Now Used on Certain Cat® C175 Engines {1061}
- Engine
- C175-16 (S/N: 3B91-101)
- C175-20 (S/N: R4F1-129)
Description Of Change: Improved fins and exhaust elbows are now used on certain Cat® C175 Engines. The improved fins with increased thickness provide better durability for exhaust flex pipe turbocharger and Clean Emissions Module (CEM) inlet.
The new exhaust elbows and bellows increase better service life.
Adaptable To: The improved fins and elbows are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
The required parts are listed in Table 1.
Show/hide table
| Qty | New Part Number | Description |
|---|---|---|
| 1 | Exhaust Elbow | |
| 1 | Exhaust Elbow | |
| 1 | Bellows As | |
| 1 | Bellows As | |
| 1 | Bellows As |
Reference: Special Instruction, M0088479, "Procedure to Selection of Parts for Right Turbocharger to Clean Emissions Module (CEM) Inlet for Certain C175 Engines".
Caterpillar Information System:
Procedure to Selection of Parts for Right Turbocharger to Clean Emissions Module (CEM) Inlet for Certain C175 Engines {1052, 1061, 108D} Procedure to Selection of Parts for Right Turbocharger to Clean Emissions Module (CEM) Inlet for Certain C175 Engines {1052, 1061, 108D}
C7.1 Commercial Marine Engine Cooling System
797F Off-Highway Truck Towing the Machine
Rain Water May Enter in Muffler/Silencers on Certain 3516 Power Modules {1062} Rain Water May Enter in Muffler/Silencers on Certain 3516 Power Modules {1062}
Improved Crankshafts are Now Used on Certain Cat® Engines {1202} Improved Crankshafts are Now Used on Certain Cat® Engines {1202}
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Electronic Control Module - Remove and Install
323F LN Excavator Machine Systems Pump Control (Output Flow) - Test - One Pump Calibration (Optional Test)
323F LN Excavator Machine Systems Main Pump (Flow) - Test - Hydraulic Power
323F LN Excavator Machine Systems Relief Valve (Swing) - Test and Adjust
336, 336 GC and 340 Excavator Systems Main Pump (Flow) - Test - Hydraulic Power
326F Excavator Machine System Relief Valve (Line) - Test and Adjust
326F Excavator Machine System Relief Valve (Main) - Test and Adjust
New Engine Software Is Now Used for Certain C32 Marine Engines {1920} New Engine Software Is Now Used for Certain C32 Marine Engines {1920}
3512E and 3516E Marine Engines Aftercooler - Remove
3512E and 3516E Marine Engines Aftercooler - Install
797F Off-Highway Truck Battery or Battery Cable - Inspect/Replace
XQP1100 Generator Set Space Heater - Test
797F Off-Highway Truck Lubricant Viscosities - Fluids Recommendations
3516B Generator Set Engines with Dynamic Gas Blending Detonation Occurrence
797F Off-Highway Truck Frame and Body - Inspect
797F Off-Highway Truck Frame and Body Support Pads - Clean/Inspect
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Hood - Remove and Install
New Speed Sensor Groups are Now Used on Certain Engines {1907, 1912} New Speed Sensor Groups are Now Used on Certain Engines {1907, 1912}
Improved Crankshafts are Now Used on Certain Cat® Products {1202} Improved Crankshafts are Now Used on Certain Cat® Products {1202}