797F Off-Highway Truck Caterpillar

Show/hide table

When it is necessary to work under the machine with the body (bed) raised, attach the body (bed) retaining cables to the rear tow points. Install the rear tow point pins through the ends of the retaining cables. Failure to properly secure the body (bed) may result in personal injury or death.

Note: To access the body support pads and areas of the frame, it may be necessary to use a portable access system (ladder, stair assembly, man lift, or other portable access system) that is suitable and compliant to local regulations.

1. Secure the dump body in the fully raised position and prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".

2. Stop the engine.
   Show/hide table

   Illustration 1	g06256627

3. Clean the body support pads.

4. Remove the truck body retaining cables and lower the dump body. For the proper procedure, refer to Operations and Maintenance Manual, "Cable (Truck Body Retaining)".

5. Visually inspect each of the body support pads. Look for damage or uneven wear of the body support pads. Look for gaps between the body support pads and the mating surfaces. If problems are found, consult your Caterpillar dealer for more information or for specific repair procedures.

6. Remove the truck body retaining cables and lower the body.