- Power Module
- PMG3516 (S/N: JKK1-UP)
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.
Problem
Rain water may enter the muffler/silencers on certain G3516 power modules if the drain hole in the exhaust outlet external sump area is not working properly. In some cases, rain water intrusion into the exhaust system may result in water entering the engine lubrication oil system (Oil Pan).
Solution
Illustration 1 | g06259089 |
(1) Drain Line |
Illustration 2 | g06263320 |
Screen partially removed. |
Caterpillar is aware of this problem, but a permanent repair has not been identified. As an interim solution, remove the screen at the outlet of the drain, and periodically clear the drain line. Verify that water flows freely from the top drain hole of the silencer through to the ground.