336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Caterpillar


Electronic Control Module - Remove and Install

Usage:

336 DKS

Removal Procedure

Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576.



Illustration 1g06251413


Illustration 2g06251414


Illustration 3g06256090


Illustration 4g06256091


Illustration 5g06256094


Illustration 6g06256095

Installation Procedure

  1. Install the electronic control module in the reverse order of removal.

Caterpillar Information System:

323F LN Excavator Machine Systems Pump Control (Output Flow) - Test - One Pump Calibration (Optional Test)
323F LN Excavator Machine Systems Main Pump (Flow) - Test - Hydraulic Power
323F LN Excavator Machine Systems Relief Valve (Swing) - Test and Adjust
336, 336 GC and 340 Excavator Systems Main Pump (Flow) - Test - Hydraulic Power
326F Excavator Machine System Relief Valve (Line) - Test and Adjust
326F Excavator Machine System Relief Valve (Main) - Test and Adjust
323F LN Excavator Machine Systems Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
323F LN Excavator Machine Systems Solenoid Valve (Proportional Reducing) - Calibrate - Power Shift Pressure
797F Off-Highway Truck Air Dryer Desiccant - Replace
C32 Generator Set Engines Vibration Damper - Check
C32 Generator Set Engines Engine Oil Pressure - Test
797F Off-Highway Truck Air Dryer - Check
Improved Crankshafts are Now Used on Certain Cat® Engines {1202} Improved Crankshafts are Now Used on Certain Cat® Engines {1202}
Rain Water May Enter in Muffler/Silencers on Certain 3516 Power Modules {1062} Rain Water May Enter in Muffler/Silencers on Certain 3516 Power Modules {1062}
797F Off-Highway Truck Towing the Machine
C7.1 Commercial Marine Engine Cooling System
Procedure to Selection of Parts for Right Turbocharger to Clean Emissions Module (CEM) Inlet for Certain C175 Engines {1052, 1061, 108D} Procedure to Selection of Parts for Right Turbocharger to Clean Emissions Module (CEM) Inlet for Certain C175 Engines {1052, 1061, 108D}
Improved Bellows Fins and Exhaust Elbows are Now Used on Certain Cat® C175 Engines {1061} Improved Bellows Fins and Exhaust Elbows are Now Used on Certain Cat® C175 Engines {1061}
New Engine Software Is Now Used for Certain C32 Marine Engines {1920} New Engine Software Is Now Used for Certain C32 Marine Engines {1920}
3512E and 3516E Marine Engines Aftercooler - Remove
3512E and 3516E Marine Engines Aftercooler - Install
797F Off-Highway Truck Battery or Battery Cable - Inspect/Replace
XQP1100 Generator Set Space Heater - Test
797F Off-Highway Truck Lubricant Viscosities - Fluids Recommendations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.