Tandem Drive Oil Sample - Obtain
Show/hide table
Illustration 1 | g06250031 |
- Clean the surface area around the oil check plug.
- Remove the oil check plug to obtain an oil sample.
- Clean the oil check plug and install the oil check plug.
Refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations", "S·O·S Services Oil Analysis" for information that pertains to obtaining a sample of the tandem drive oil. Refer to Special Publication, PEHP6001, "How To Take A Good Oil Sample" for more information about obtaining a sample of the tandem drive oil.
Caterpillar Information System:
140 Motor Grader Tandem Drive Oil Level - Check
140 Motor Grader Tandem Drive Oil - Change
140 Motor Grader Tandem Breather - Clean/Replace
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295} Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
140 Motor Grader Steering Cylinder Ends and Tie Rods - Lubricate
140 Motor Grader Rollover Protective Structure (ROPS) - Inspect
140 Motor Grader Oil Filter (All Wheel Drive) - Replace - If Equipped
140 Motor Grader Moldboard Wear Strip - Inspect/Adjust/Replace
140 Motor Grader Hydraulic System Oil - Change
140 Motor Grader Fuses - Replace
C9.3B Engines for Caterpillar Built Machines Nitrogen Oxide Sensor (Exhaust Inlet) - Remove and Install
140 Motor Grader Secondary Steering - Test
140 Motor Grader Transmission and Differential Oil - Change
140 Motor Grader Transmission and Differential Oil Filter and Screens - Replace/Clean
140 Motor Grader Transmission and Differential Oil Level - Check
140 Motor Grader Transmission and Differential Oil Sample - Obtain
C9.3B Engines for Caterpillar Built Machines Nitrogen Oxide Sensor (Exhaust Outlet) - Remove and Install
C32 Marine Engines Auxiliary Water Pump - Remove
320 GC, 320 and 323 Excavator Production Measurement Application
336, 336 GC and 340 Excavator Systems Cylinder Drift - Check - Empty Bucket
Cat® PVT110, PVT115, PVT117, PVT120 Photo Voltaic Module {1471, 4822} Cat® PVT110, PVT115, PVT117, PVT120 Photo Voltaic Module {1471, 4822}
New Aftercooler Heat Shield Assemblies is Now Used for Certain 3500 Marine Engines {1063, 1073} New Aftercooler Heat Shield Assemblies is Now Used for Certain 3500 Marine Engines {1063, 1073}
Rework Procedure of the Coolant Level Wiring Harness on Certain G3306B Generator Sets {1408, 4459, 7422, 7938} Rework Procedure of the Coolant Level Wiring Harness on Certain G3306B Generator Sets {1408, 4459, 7422, 7938}
140 Motor Grader Operator Controls