Tandem Breather - Clean/Replace
Show/hide table
Illustration 1 | g06348015 |
Note: Replace breathers (1) if the breathers are damaged.
Caterpillar Information System:
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295} Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
140 Motor Grader Steering Cylinder Ends and Tie Rods - Lubricate
140 Motor Grader Rollover Protective Structure (ROPS) - Inspect
140 Motor Grader Oil Filter (All Wheel Drive) - Replace - If Equipped
140 Motor Grader Moldboard Wear Strip - Inspect/Adjust/Replace
140 Motor Grader Hydraulic System Oil - Change
140 Motor Grader Fuses - Replace
C9.3B Engines for Caterpillar Built Machines Nitrogen Oxide Sensor (Exhaust Inlet) - Remove and Install
140 Motor Grader Secondary Steering - Test
330, 330 GC, 336, 336 GC and 340 Excavator Tool Control Medium Pressure: Relief Valve (Main) - Test and Adjust
320GC and 320 Excavator Engine Supplement Water Temperature Regulator - Remove and Install
140 Motor Grader Fuel System Water Separator - Drain
140 Motor Grader Tandem Drive Oil - Change
140 Motor Grader Tandem Drive Oil Level - Check
140 Motor Grader Tandem Drive Oil Sample - Obtain
140 Motor Grader Transmission and Differential Oil - Change
140 Motor Grader Transmission and Differential Oil Filter and Screens - Replace/Clean
140 Motor Grader Transmission and Differential Oil Level - Check
140 Motor Grader Transmission and Differential Oil Sample - Obtain
C9.3B Engines for Caterpillar Built Machines Nitrogen Oxide Sensor (Exhaust Outlet) - Remove and Install
C32 Marine Engines Auxiliary Water Pump - Remove
320 GC, 320 and 323 Excavator Production Measurement Application
336, 336 GC and 340 Excavator Systems Cylinder Drift - Check - Empty Bucket
Cat® PVT110, PVT115, PVT117, PVT120 Photo Voltaic Module {1471, 4822} Cat® PVT110, PVT115, PVT117, PVT120 Photo Voltaic Module {1471, 4822}