Stick - Remove and Install
参考: 专门说明书, "目视维修步骤 - 颜色和符号" , M0066576。
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 8S-7615 | 销组件 | 1 |
| 4C-6486 | 台架 | 1 | |
| 8S-7641 | 管 | 1 | |
| 8S-8048 | 鞍座 | 1 | |
开始:
- 拆下铲斗。
Show/hide table
| |
| 图 1 | g06206062 |
|
释放液压系统压力。 | |
Show/hide table
| |
| 图 2 | g06206063 |
Show/hide table
| |
| 图 3 | g06206064 |
|
对另一侧重复步骤 3。 | |
Show/hide table
| |
| 图 4 | g06206071 |
Show/hide table
| |
| 图 5 | g06206072 |
Show/hide table
| |
| 图 6 | g06206073 |
Show/hide table
| |
| 图 7 | g06206074 |
- 按与拆卸相反的顺序安装斗杆。
Caterpillar Information System:
3500 Generator Sets with Dynamic Gas Blending Maintenance Recommendations
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Cylinder - Remove and Install - If Equipped with Special Nuts
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499} Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure - Diesel System
3500 Generator Sets with Dynamic Gas Blending Overhaul (Top End)
The Hour Meter On Certain Telehandlers, Industrial Engines,and Paving Compactorswith the C3.4B Engine Cannot Be Changed Using Caterpillar Electronic Technician Service Tool {7451} The Hour Meter On Certain Telehandlers, Industrial Engines,and Paving Compactorswith the C3.4B Engine Cannot Be Changed Using Caterpillar Electronic Technician Service Tool {7451}
3516B Generator Set Engines with Dynamic Gas Blending Air Shutoff - Test - No Codes
3516B Generator Set Engines with Dynamic Gas Blending Gas Substitution Percentage Is Low
3516E Generator Set Engines Cylinder Head
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing SCR Catalyst Inlet Pressure Is Low
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing SCR Catalyst Inlet Pressure Is High
C280-16 Marine Propulsion Engine Sensor Signal (Analog, Active) - Test
3500 Generator Sets with Dynamic Gas Blending Configuration Parameters
320GC, 320 and 323 Excavators Machine Systems Main Control Valve - Disassemble
Converting from an ABB Turbocharger to a Napier Turbocharger on 3612 Engines Operating on Diesel Fuel {1052, 1061, 1062, 1063, 1071} Converting from an ABB Turbocharger to a Napier Turbocharger on 3612 Engines Operating on Diesel Fuel {1052, 1061, 1062, 1063, 1071}
320 GC, 320 and 323 Excavator Belt - Inspect/Adjust/Replace
Coolant Line Is Failing On Certain G3500 Engines {1052, 1380} Coolant Line Is Failing On Certain G3500 Engines {1052, 1380}
Instructions for Sorting and Replacing HVAC Actuators {1800, 7320} Instructions for Sorting and Replacing HVAC Actuators {1800, 7320}
Engine Shutdown Procedure on Certain C4.4 Engines {108I} Engine Shutdown Procedure on Certain C4.4 Engines {108I}
Inspection and Installation of the 285-8515 Bracket on the 353-8989 Radiator Support Assembly for Certain 3516C Generator Sets {1274, 1353} Inspection and Installation of the 285-8515 Bracket on the 353-8989 Radiator Support Assembly for Certain 3516C Generator Sets {1274, 1353}
G3516 Petroleum Engines Prelubrication Oil Pump - Remove and Install
A New NOx Reduction System Cooler Group and Water Lines Group Is Now Used on Certain C15 / C18Tier 4 Commercial Engines {108G} A New NOx Reduction System Cooler Group and Water Lines Group Is Now Used on Certain C15 / C18Tier 4 Commercial Engines {108G}
C11 and C13 Industrial Engines Engine Valve Lash - Inspect/Adjust
797 Off-Highway Truck Steering Link - Remove and Install - If equipped with Special Nuts