The Hour Meter On Certain Telehandlers, Industrial Engines,and Paving Compactorswith the C3.4B Engine Cannot Be Changed Using Caterpillar Electronic Technician Service Tool {7451}
- Engine
- C3.4B (S/N: CF61-UP; CJ71-UP)
- Pneumatic Compactor
- CW16 (S/N: TL51-UP; N6J1-UP)
- Telehandler
- TH3510D (S/N: TH21-UP)
- TH357D (S/N: TD71-UP)
- TH408D (S/N: TH91-UP)
- TH514D (S/N: MWG1-UP)
- TL642D (S/N: ML81-UP)
- TL943D (S/N: MLJ1-UP)
- TH357D (S/N: TD71-UP)
- Vibratory Soil Compactor
- CP44B (S/N: 4P41-UP; GNB1-UP)
- CS44B (S/N: CS31-UP; 4G31-UP)
The hour meter on certain Telehandlers, Industrial Engines, and Paving Compactors with the C3.4B engine cannot be adjusted, changed, or corrected using the Caterpillar Electronic Technician service tool. See table 1 for a list of additional affected engine serial number prefixes. There is no fix for this issue.
Show/hide table
Affected Industrial and Captive C3.4B Engine Serial Numbers |
---|
S/N:CNW1-UP |
S/N:CN51-UP |
S/N:CJG1-UP |
S/N:CJ41-UP |
Caterpillar Information System:
3516B Generator Set Engines with Dynamic Gas Blending Air Shutoff - Test - No Codes
3516B Generator Set Engines with Dynamic Gas Blending Gas Substitution Percentage Is Low
3516E Generator Set Engines Cylinder Head
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing SCR Catalyst Inlet Pressure Is Low
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing SCR Catalyst Inlet Pressure Is High
C280-16 Marine Propulsion Engine Sensor Signal (Analog, Active) - Test
XGC1900 Generator Sets Model View Illustrations
C27 and C32 Engine for MD6250 and MD6310 Drill Engine Misfires, Runs Rough or Is Unstable
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing DEF Tank Temperature Is Low
C32 Tier 4 Final Marine Commercial Engines Crankcase Pressure Is High
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing DEF Tank Temperature Is High
Selective Catalytic Reduction Retrofit Aftertreatment - Airless Dosing DEF Tank Level Is High
3500 Generator Sets with Dynamic Gas Blending Overhaul (Top End)
3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure - Diesel System
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499} Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Cylinder - Remove and Install - If Equipped with Special Nuts
3500 Generator Sets with Dynamic Gas Blending Maintenance Recommendations
320GC, 320 and 323 Excavators Machine Systems Stick - Remove and Install
3500 Generator Sets with Dynamic Gas Blending Configuration Parameters
320GC, 320 and 323 Excavators Machine Systems Main Control Valve - Disassemble
Converting from an ABB Turbocharger to a Napier Turbocharger on 3612 Engines Operating on Diesel Fuel {1052, 1061, 1062, 1063, 1071} Converting from an ABB Turbocharger to a Napier Turbocharger on 3612 Engines Operating on Diesel Fuel {1052, 1061, 1062, 1063, 1071}
320 GC, 320 and 323 Excavator Belt - Inspect/Adjust/Replace
Coolant Line Is Failing On Certain G3500 Engines {1052, 1380} Coolant Line Is Failing On Certain G3500 Engines {1052, 1380}
Instructions for Sorting and Replacing HVAC Actuators {1800, 7320} Instructions for Sorting and Replacing HVAC Actuators {1800, 7320}