Prelubrication Oil Pump - Remove and Install
- Disconnect hose (1) and set to the side.
- Remove tube (2).
Show/hide table
Illustration 2 g06206644 - Remove four bolts (3) and four bolts (4).
- Use two people to remove the prelubrication pump (5). The prelubrication pump (5) weighs approximately
23 kg (51 lb) .
Show/hide table
| |
| Illustration 1 | g06206633 |
Caterpillar Information System:
Inspection and Installation of the 285-8515 Bracket on the 353-8989 Radiator Support Assembly for Certain 3516C Generator Sets {1274, 1353} Inspection and Installation of the 285-8515 Bracket on the 353-8989 Radiator Support Assembly for Certain 3516C Generator Sets {1274, 1353}
Engine Shutdown Procedure on Certain C4.4 Engines {108I} Engine Shutdown Procedure on Certain C4.4 Engines {108I}
Instructions for Sorting and Replacing HVAC Actuators {1800, 7320} Instructions for Sorting and Replacing HVAC Actuators {1800, 7320}
Coolant Line Is Failing On Certain G3500 Engines {1052, 1380} Coolant Line Is Failing On Certain G3500 Engines {1052, 1380}
320 GC, 320 and 323 Excavator Belt - Inspect/Adjust/Replace
Converting from an ABB Turbocharger to a Napier Turbocharger on 3612 Engines Operating on Diesel Fuel {1052, 1061, 1062, 1063, 1071} Converting from an ABB Turbocharger to a Napier Turbocharger on 3612 Engines Operating on Diesel Fuel {1052, 1061, 1062, 1063, 1071}
320GC, 320 and 323 Excavators Machine Systems Main Control Valve - Disassemble
3500 Generator Sets with Dynamic Gas Blending Configuration Parameters
320GC, 320 and 323 Excavators Machine Systems Stick - Remove and Install
3500 Generator Sets with Dynamic Gas Blending Maintenance Recommendations
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Cylinder - Remove and Install - If Equipped with Special Nuts
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499} Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
A New NOx Reduction System Cooler Group and Water Lines Group Is Now Used on Certain C15 / C18Tier 4 Commercial Engines {108G} A New NOx Reduction System Cooler Group and Water Lines Group Is Now Used on Certain C15 / C18Tier 4 Commercial Engines {108G}
C11 and C13 Industrial Engines Engine Valve Lash - Inspect/Adjust
797 Off-Highway Truck Steering Link - Remove and Install - If equipped with Special Nuts
C32 Marine Auxiliary Engine Maintenance Interval Schedule
New Engine Software is Now Used for Certain 3516E Engines {1920} New Engine Software is Now Used for Certain 3516E Engines {1920}
Aftertreatment Regeneration on Certain C1.5 and C2.2 Engines {108B, 108E, 108M, 108U} Aftertreatment Regeneration on Certain C1.5 and C2.2 Engines {108B, 108E, 108M, 108U}
PM820, PM822, and PM825 Cold Planer Machine Systems Track Roller - Remove and Install
3512B Generator Set Engines with Dynamic Gas Blending System Configuration Parameters
C9.3 Marine Auxiliary and Generator Set Engine Oil Pressure Is Low
PVT120 Photovoltaic Modules Operation Information
Diesel Exhaust Fluid Quality Sensors May Have Fault Codes on Certain Tier 4 Final Engines {108H, 108K, 1439} Diesel Exhaust Fluid Quality Sensors May Have Fault Codes on Certain Tier 4 Final Engines {108H, 108K, 1439}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290} Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}