Travel Motor - Remove and Install
参考: 专门说明书, "目视维修步骤 - 颜色和符号" , M0066576。
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 9U-7692 | 螺杆 | 2 |
开始:
- 拆下背压阀。
Show/hide table
| 注意 |
|---|
|
在检查、保养、测试、调整及维修产品时，请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前，请准备好盛接液体用的适当容器。 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 液压系统被异物污染会缩短液压系统部件的使用寿命。 为了避免污染物进入液压系统，总要在断开后塞住或盖住管路、管接头或软管。 罩住已解体的部件，然后在组装前正确清洁它们。 在更换任何主部件后，或特别是在部件故障后，正确清洁液压系统，以便去除全部污染物。 |
- 将终传动的机油排入适当的容器以便保存或处理。
Show/hide table
| |
| 图 1 | g06190083 |
Show/hide table
| |
| 图 2 | g06190087 |
Show/hide table
| |
| 图 3 | g06190089 |
Show/hide table
| |
| 图 4 | g06190094 |
- 按与拆卸相反的顺序安装行驶马达。
- 加注终传动。 请参阅操作和保养手册终传动油 - 更换以了解正确的加注步骤。
Caterpillar Information System:
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Gear Cover - Remove and Install
G3304 and G3306 Engines Engine Balancer Shaft - Remove and Install
C9.3B Engine Electrical Power Supply - Test
3516B Generator Set Engines with Dynamic Gas Blending Calibration - <B>175-4998</B> Signal Converter
3500B Generator Sets Generator Bearing - Replace
C9.3B Engine Engine Throttle Valve - Test
Update required for 498-6540 and 498-6541 Tensioner Pump Groups used for 3600 Rod Bolt Tensioning {0374, 0599, 1000, 1218, 1219, 7610, 7620} Update required for 498-6540 and 498-6541 Tensioner Pump Groups used for 3600 Rod Bolt Tensioning {0374, 0599, 1000, 1218, 1219, 7610, 7620}
A New NRS Coolant Return Line Clamp is Now Used on Certain C15 and C18 Engines {1355, 1380, 1393} A New NRS Coolant Return Line Clamp is Now Used on Certain C15 and C18 Engines {1355, 1380, 1393}
120 and 120 AWD Motor Grader Seat
320GC, 320 and 323 Excavators Machine Systems Track Carrier Roller - Remove and Install
PM620 and PM622 Cold Planer Water Spray Pump Oil (High Pressure) - Change
320GC, 320 and 323 Excavators Machine Systems Track Roller - Remove and Install
PM620 and PM622 Cold Planer Water Spray Pump Oil Level (High Pressure) - Check
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Tank Not Filling
C175 Tier 4 Final Engines for Off-Highway Trucks Electronic Service Tools
C175 Tier 4 Final Engines for Off-Highway Trucks Engine Monitoring System
C9.3 Tier 4 Final Engines Turbocharger Balance Valve Air Lines
C175 Tier 4 Final Engines for Off-Highway Trucks Coolant Temperature Is High
An Improved Monitor Display Group Is Now Used on Certain C32 Marine Engines {7490} An Improved Monitor Display Group Is Now Used on Certain C32 Marine Engines {7490}
C175 Tier 4 Final Engines for Off-Highway Trucks Coolant Temperature Is Low
New Exhaust Heat Shields Are Now Used on Certain 3500C Series Engines {1063, 1067} New Exhaust Heat Shields Are Now Used on Certain 3500C Series Engines {1063, 1067}
3500B Generator Sets Generator Bearing - Inspect
A New Turbocharge Heat Shield Group is Now Used for Certain 3512C and 3516C Engines {1052, 1073} A New Turbocharge Heat Shield Group is Now Used for Certain 3512C and 3516C Engines {1052, 1073}
New Exhaust Bypass Valve and Soft Exhaust Shields Used on C280-16 T4 Front Mount Turbo Units {1052, 1057, 1059} New Exhaust Bypass Valve and Soft Exhaust Shields Used on C280-16 T4 Front Mount Turbo Units {1052, 1057, 1059}