Gear Cover - Remove and Install
- Remove bolts (5) and cover (6).
- Disconnect hose assembly (1). Remove fitting (2).
- Remove bolts (3) and cover (4).
Show/hide table
Illustration 2 g03366606 - Attach a suitable lifting device to gear cover (7). The weight of gear cover (7) is approximately
57 kg (126 lb) . Remove bolts (8), gear cover (7), and the gasket. Repeat Steps 2 and 3 for other side.
Show/hide table
Illustration 1 | g03366605 |
Show/hide table
Require Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Loctite 262 | - |
- Install gear cover (7) in the reverse order of removal.
- Apply Tooling (A) to the threads of the bolts (5).
- Apply Tooling (A) to the threads of the bolts (3).
Caterpillar Information System:
G3304 and G3306 Engines Engine Balancer Shaft - Remove and Install
C9.3B Engine Electrical Power Supply - Test
3516B Generator Set Engines with Dynamic Gas Blending Calibration - <B>175-4998</B> Signal Converter
3500B Generator Sets Generator Bearing - Replace
C9.3B Engine Engine Throttle Valve - Test
Update required for 498-6540 and 498-6541 Tensioner Pump Groups used for 3600 Rod Bolt Tensioning {0374, 0599, 1000, 1218, 1219, 7610, 7620} Update required for 498-6540 and 498-6541 Tensioner Pump Groups used for 3600 Rod Bolt Tensioning {0374, 0599, 1000, 1218, 1219, 7610, 7620}
A New NRS Coolant Return Line Clamp is Now Used on Certain C15 and C18 Engines {1355, 1380, 1393} A New NRS Coolant Return Line Clamp is Now Used on Certain C15 and C18 Engines {1355, 1380, 1393}
120 and 120 AWD Motor Grader Seat
320GC, 320 and 323 Excavators Machine Systems Track Carrier Roller - Remove and Install
PM620 and PM622 Cold Planer Water Spray Pump Oil (High Pressure) - Change
320GC, 320 and 323 Excavators Machine Systems Track Roller - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Front Idler and Recoil Spring - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Travel Motor - Remove and Install
PM620 and PM622 Cold Planer Water Spray Pump Oil Level (High Pressure) - Check
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Tank Not Filling
C175 Tier 4 Final Engines for Off-Highway Trucks Electronic Service Tools
C175 Tier 4 Final Engines for Off-Highway Trucks Engine Monitoring System
C9.3 Tier 4 Final Engines Turbocharger Balance Valve Air Lines
C175 Tier 4 Final Engines for Off-Highway Trucks Coolant Temperature Is High
An Improved Monitor Display Group Is Now Used on Certain C32 Marine Engines {7490} An Improved Monitor Display Group Is Now Used on Certain C32 Marine Engines {7490}
C175 Tier 4 Final Engines for Off-Highway Trucks Coolant Temperature Is Low
New Exhaust Heat Shields Are Now Used on Certain 3500C Series Engines {1063, 1067} New Exhaust Heat Shields Are Now Used on Certain 3500C Series Engines {1063, 1067}
3500B Generator Sets Generator Bearing - Inspect
A New Turbocharge Heat Shield Group is Now Used for Certain 3512C and 3516C Engines {1052, 1073} A New Turbocharge Heat Shield Group is Now Used for Certain 3512C and 3516C Engines {1052, 1073}