Front Idler and Recoil Spring - Remove and Install
参考: 专门说明书, "目视维修步骤 - 颜色和符号" M0066576。
开始:
- 分离履带组件。
Show/hide table
反冲弹簧组件的弹簧需要数吨的力才能压缩。 当螺母位于固定连杆末端时,请勿尝试压缩或释放弹簧的张力。 固定连杆或螺母上螺纹的损坏可造成组件带有弹力分离,从而导致人身伤亡。 |
Show/hide table
图 1 | g06189455 |
Show/hide table
图 2 | g06189456 |
Show/hide table
图 3 | g06189457 |
Show/hide table
图 4 | g06189459 |
Show/hide table
图 5 | g06189463 |
- 按与拆卸相反的顺序安装前引导轮和反冲弹簧。
Caterpillar Information System:
320GC, 320 and 323 Excavators Machine Systems Counterbalance Valve (Travel) - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Machine System
120 and 120 AWD Motor Grader Restricted Visibility
320 GC, 320 and 323 Excavator Machine Systems Bucket System
320 GC, 320 and 323 Excavator Machine Systems Stick System
320 GC, 320 and 323 Excavator Machine Systems Boom System
120 and 120 AWD Motor Grader Battery Disconnect Switch
120 and 120 AWD Motor Grader Parking
120 and 120 AWD Motor Grader Engine Shutdown Switch - Check
120 and 120 AWD Motor Grader Battery or Battery Cable - Inspect/Replace
120 and 120 AWD Motor Grader Backup Alarm - Test
120 and 120 AWD Motor Grader Engine Starting with Auxiliary Start Receptacle
320GC, 320 and 323 Excavators Machine Systems Track Roller - Remove and Install
PM620 and PM622 Cold Planer Water Spray Pump Oil (High Pressure) - Change
320GC, 320 and 323 Excavators Machine Systems Track Carrier Roller - Remove and Install
120 and 120 AWD Motor Grader Seat
A New NRS Coolant Return Line Clamp is Now Used on Certain C15 and C18 Engines {1355, 1380, 1393} A New NRS Coolant Return Line Clamp is Now Used on Certain C15 and C18 Engines {1355, 1380, 1393}
Update required for 498-6540 and 498-6541 Tensioner Pump Groups used for 3600 Rod Bolt Tensioning {0374, 0599, 1000, 1218, 1219, 7610, 7620} Update required for 498-6540 and 498-6541 Tensioner Pump Groups used for 3600 Rod Bolt Tensioning {0374, 0599, 1000, 1218, 1219, 7610, 7620}
C9.3B Engine Engine Throttle Valve - Test
3500B Generator Sets Generator Bearing - Replace
3516B Generator Set Engines with Dynamic Gas Blending Calibration - <B>175-4998</B> Signal Converter
C9.3B Engine Electrical Power Supply - Test
G3304 and G3306 Engines Engine Balancer Shaft - Remove and Install
WS223, WS223 SS, WS223 XD, WS255, WS255 SS, WS255 XD, WSP223, WSP255, WSF223, WSF223 SS, WSF223 XD, WSF255, WSF255 SS and WSF255 XD Well Stimulation Pumps Gear Cover - Remove and Install