Pistons and Connecting Rods - Assemble
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 7B-7975 | Piston Ring Expander Gp | 1 |
- Use Tooling (A) to install piston rings (8), (9), and (10) onto piston (11).
Show/hide table
Illustration 2 g06087126 - Install connecting rod (5) and pin (7). Install clip (6) and repeat for the other side.
Show/hide table
Illustration 3 g06087090 - Install bearing (4) and bearing (3).
Show/hide table
Illustration 4 g06086982 - Install cap (2) and install bolts (1). Tighten bolts (1) to a torque of
70 ± 4 N·m (52 ± 3 lb ft) .
Show/hide table
Illustration 1 | g06087150 |
Caterpillar Information System:
3516E Engines for Caterpillar Built Machines Crankshaft
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Product Lifting
C1.7 and C2.2 Industrial Engines Cylinder Head
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Plate Locations and Film Locations
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Product Description
PG145 Transmission Oil Filter (Transmission)
PG145 Transmission Gear Pump (Transmission)
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Model View Illustrations
PG145 Transmission Torque Converter
PG145 Transmission Transmission Power Flow
PG145 Transmission Hydraulic System Schematic
PG145 Transmission Location of Hydraulic Components for Transmission System
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Control Panel - Cat Marine Power Display (MPD) Control Panel (If Equipped)
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201} A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
C1.7 and C2.2 Industrial Engines Crankshaft
C12.9 Marine Engines Cylinder Liner - Remove and Install
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Monitoring System - Diagnostic Trouble Codes and Event Codes
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Configuration Parameters
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Before Starting Engine
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Starting the Engine
Remote Oil Filter Installation Is Now Available for Certain CX31 Transmissions {3067} Remote Oil Filter Installation Is Now Available for Certain CX31 Transmissions {3067}
3516E Engines for Caterpillar Built Machines Gear Group (Front)
3516E Engines Engine Speed/Timing Sensor - Remove and Install
3516E Engines Atmospheric Pressure Sensor - Remove and Install