Remote Oil Filter Installation Is Now Available for Certain CX31 Transmissions {3067}
- On Highway Transmission
- CX31 (S/N: D9F1-UP; D9R1-UP; PTT1-UP; PTW1-UP; B3X1-UP; PTX1-UP)
- CX31 HT (S/N: HTC1-UP)
- Transmission
- CX31 (S/N: EBW1-UP)
- CX31-P300 (S/N: HYB1-UP)
Remote mounting of both canister style oil filters or cartridge style oil filters is now optional for the machines listed above.
Ensure during the installation process that the oil lines are routed to the correct port from the local transmission oil filter base mounting plate to the removed and remotely installed filter base.
Show/hide table
Illustration 1 | g06088821 |
Show/hide table
Illustration 2 | g06088875 |
Detailed view of area A (B) IN (C) OUT |
The local transmission filter base mounting plate and filter base are marked IN and OUT to indicate the oil flow. Refer to Illustration 2 for the flow of oil IN and OUT.
Caterpillar Information System:
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Starting the Engine
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Before Starting Engine
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Configuration Parameters
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Monitoring System - Diagnostic Trouble Codes and Event Codes
C12.9 Marine Engines Cylinder Liner - Remove and Install
C1.7 and C2.2 Industrial Engines Crankshaft
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201} A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Control Panel - Cat Marine Power Display (MPD) Control Panel (If Equipped)
C12.9 Marine Engines Pistons and Connecting Rods - Assemble
3516E Engines for Caterpillar Built Machines Crankshaft
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Product Lifting
C1.7 and C2.2 Industrial Engines Cylinder Head
3516E Engines for Caterpillar Built Machines Gear Group (Front)
3516E Engines Engine Speed/Timing Sensor - Remove and Install
3516E Engines Atmospheric Pressure Sensor - Remove and Install
3516E Engines Engine Speed Sensor - Remove and Install
3516E Engines Crankshaft - Remove
3516E Engines Crankshaft - Install
3512E Tier 4 Final Engines for Land Electric Drilling Water Pump
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Cold Weather Starting
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Refill Capacities
TR35 Railway Transmission Lubricant Viscosities - Fluids Recommendations
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Engine Oil Level - Check
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Maintenance Recommendations