Product Lifting
Show/hide table
| |
| 图 1 | g01020684 |
Show/hide table
 |
|
不适当的吊具会使被吊装设备翻倒，造成伤害和损坏。 |
Show/hide table
| |
| 图 2 | g00103219 |
Show/hide table
| 注意 |
|---|
|
千万不要折弯吊环螺栓和支架。 吊环螺栓和支架只能承受张力负荷。 要记住当支承构件和物体之间的角度小于90°时，吊环螺栓的承载能力变小。 当必须在某一角度搬移部件时，只能使用具有适当额定载荷的连杆支架。 |
使用起重机搬移重的部件。 使用一个可调的吊粱起吊发动机。 所有的支承构件（链条和钢丝绳）应互相平行。 链条和钢丝绳与被吊物的顶面尽可能保持垂直。
有些搬移工作要求用吊装工具吊装，以确保适当的平衡。 吊装工具有助于保证安全。
只在拆卸发动机时，要使用发动机上的吊耳。
吊耳是为特定的发动机装置设计和安装的。 更换吊耳和/或发动机会使吊耳和吊具不能使用。 如果更换了吊环螺栓和/或发动机，则应确保提供合适的起吊装置。 有关正确起吊发动机的吊具资料，请向 Cat 代理商咨询。
Show/hide table
| |
| 图 3 | g06087409 |
| (1) 发动机吊耳 | |
Show/hide table
| 发动机重量 | ||
| 发动机 | 近似发动机净干重 | |
| 3516C | 8900 kg 至 9400 kg | 19625 lb 至 20725 lb |
Caterpillar Information System:
C1.7 and C2.2 Industrial Engines Cylinder Head
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Plate Locations and Film Locations
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Product Description
PG145 Transmission Oil Filter (Transmission)
PG145 Transmission Gear Pump (Transmission)
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Model View Illustrations
PG145 Transmission Torque Converter
PG145 Transmission Transmission Power Flow
PG145 Transmission Hydraulic System Schematic
PG145 Transmission Location of Hydraulic Components for Transmission System
PG145 Transmission Location of Electronic Components for Transmission System
PG145 Transmission General Information
3516E Engines for Caterpillar Built Machines Crankshaft
C12.9 Marine Engines Pistons and Connecting Rods - Assemble
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Control Panel - Cat Marine Power Display (MPD) Control Panel (If Equipped)
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201} A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
C1.7 and C2.2 Industrial Engines Crankshaft
C12.9 Marine Engines Cylinder Liner - Remove and Install
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Monitoring System - Diagnostic Trouble Codes and Event Codes
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Configuration Parameters
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Before Starting Engine
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Starting the Engine
Remote Oil Filter Installation Is Now Available for Certain CX31 Transmissions {3067} Remote Oil Filter Installation Is Now Available for Certain CX31 Transmissions {3067}
3516E Engines for Caterpillar Built Machines Gear Group (Front)