Gear Group (Front)
Show/hide table
| |
| Illustration 1 | g06087703 |
|
Typical Example Front view of engine | |
Show/hide table
| Specification for 423-3679 Front Gear Gp, 458-9887 Front Gear Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 1 | 366-5349 Adapter As | After installation, bore of 127-5400 Bushing is |
| 2 | 1 | - | After installation, bore of 140-9597 Bushing is Installation depth is |
| 3 | 1 | - | Diameter is |
| 4 | 1 | 7N-5245 Pump Adapter | After installation, bore of 127-5400 Bushing is |
| 5 | 2 | 259-4598 O-Ring Seal | Before assembly, lightly lubricate the bores with the lubricant that is being sealed. |
| 6 | 1 | 235-3546 O-Ring Seal | Before assembly, lightly lubricate the bores with the lubricant that is being sealed. |
| 7 | 1 | 367-0069 Auxiliary Drive Shaft As | Diameter is Install the 8T-2153 Socket Setscrew to the bottom of the threaded hole and tighten to |
| 8 | 2 | 7N-5246 Thrust Washer | Thickness is Width of groove in new pump drive shaft assembly is |
| 9 | 1 | 7C-3258 Thrust Washer Assembly | Thickness is Protrusion of the dowel (B) is |
Caterpillar Information System:
Remote Oil Filter Installation Is Now Available for Certain CX31 Transmissions {3067} Remote Oil Filter Installation Is Now Available for Certain CX31 Transmissions {3067}
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Starting the Engine
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Before Starting Engine
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Configuration Parameters
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Monitoring System - Diagnostic Trouble Codes and Event Codes
C12.9 Marine Engines Cylinder Liner - Remove and Install
C1.7 and C2.2 Industrial Engines Crankshaft
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201} A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Control Panel - Cat Marine Power Display (MPD) Control Panel (If Equipped)
C12.9 Marine Engines Pistons and Connecting Rods - Assemble
3516E Engines for Caterpillar Built Machines Crankshaft
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Product Lifting
3516E Engines Engine Speed/Timing Sensor - Remove and Install
3516E Engines Atmospheric Pressure Sensor - Remove and Install
3516E Engines Engine Speed Sensor - Remove and Install
3516E Engines Crankshaft - Remove
3516E Engines Crankshaft - Install
3512E Tier 4 Final Engines for Land Electric Drilling Water Pump
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Cold Weather Starting
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Refill Capacities
TR35 Railway Transmission Lubricant Viscosities - Fluids Recommendations
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Engine Oil Level - Check
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Maintenance Recommendations
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Starting Motor - Inspect