Engine Oil Sequence Valves - Remove and Install
Start By:
- Remove front housing.
- Remove flywheel housing.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
 |
|
Personal injury can result from parts and/or covers under spring pressure. Spring force will be released when covers are removed. Be prepared to hold spring loaded covers as the bolts are loosened. |
- Remove bolts (2), cover (1), and the O-ring seal.
Show/hide table
Illustration 2 g06056871 - Remove plunger (3) and the spring.
Show/hide table
Illustration 3 g06056888 - Remove bolts (5), cover (4), and the O-ring seal.
Show/hide table
Illustration 4 g06056898 - Remove plunger (6) and the spring.
Show/hide table
| |
| Illustration 1 | g06056854 |
- Install the engine oil sequence valves in the reverse order of removal.
Caterpillar Information System:
XQP500 Generator Sets Refill Capacities
C9.3 Marine Auxiliary Engines Sensors and Electrical Components
XQP500 Generator Sets Product Lifting
Inspection of the 287-8585 Bushing and Pulley Assembly on Certain 3516C Generator Set Engines {1359} Inspection of the 287-8585 Bushing and Pulley Assembly on Certain 3516C Generator Set Engines {1359}
The 243-2501 Fan Guard May Crack on Certain 3500 Generator Set Engines {1353, 1360} The 243-2501 Fan Guard May Crack on Certain 3500 Generator Set Engines {1353, 1360}
An Improved Exhaust Manifold Group Is Now Used For Certain 3512E Engines {1059} An Improved Exhaust Manifold Group Is Now Used For Certain 3512E Engines {1059}
C9.3 Marine Auxiliary Engines Safety Messages
XQP500 Generator Sets Electrical System
C7.1 Marine Engine Fuel Priming Pump - Remove and Install
3512E Tier 4 Final Engines for Land Electric Drilling Engine Shutdown Occurs Intermittently
C4.4 (Mech) Industrial Engine Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
C4.4 (Mech) Industrial Engine Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734} NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
XQP500 Generator Sets Setup
3512E Engines Gear Group (Rear) - Remove and Install
XQP500 Generator Sets Product Description
C7.1 Marine Engine Fuel Filter Base - Remove and Install
3512E Engines Piston Cooling Jets - Remove and Install
Inadvertent Advanced Control Joystick (ACJ) Float Control Activation Occurs On Certain Motor Graders {3168, 4343, 5063, 5705, 7000} Inadvertent Advanced Control Joystick (ACJ) Float Control Activation Occurs On Certain Motor Graders {3168, 4343, 5063, 5705, 7000}
C7.1 Marine Engine Fuel Cooler - Remove and Install
XQP500 Generator Sets Safety Messages
3512E Engines Cylinder Liner - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Fuel Filter Is Restricted
The Compressor By-Pass Valve Actuator Might Fail On Certain G3500B Engines {1803, 5510, 7602, 7610, 7620} The Compressor By-Pass Valve Actuator Might Fail On Certain G3500B Engines {1803, 5510, 7602, 7610, 7620}