An Improved Exhaust Manifold Group Is Now Used For Certain 3512E Engines {1059}
- Engine
- 3512E (S/N: SK31-UP; SK51-UP)
- Pumper
- SPF743 (S/N: MLX1-UP)
Description Of Change: The new exhaust manifold that is used has incorporated new parts to prevent cracking.
Adaptable To: The new 474-9932 Exhaust Manifold Gp replaces the previous 452-2711 Exhaust Manifold Gp. The 474-9932 Exhaust Manifold Gp is adaptable back to first production of the serial numbers that are listed above.
Table 1 contains the part numbers in the group. Table 2 contains the effective serial numbers.
Show/hide table
Item | Qty | Part Number | Part Name |
---|---|---|---|
1 | 1 | Exhaust Manifold | |
2 | 2 | Exhaust Manifolds | |
3 | 3 | Exhaust Manifolds | |
4 | 108 | Washers | |
5 | 2 | Exhaust Seals | |
6 | 1 | Dowel Pin | |
7 | 7 | Bellows As | |
8 | 68 | Locknuts | |
9 | 8 | Bolts | |
10 | 12 | Spacers | |
11 | 2 | Gaskets | |
12 | 9 | Band Clamps | |
13 | 12 | Gaskets | |
14 | 14 | Gaskets | |
15 | 1 | Elbow | |
16 | 1 | Elbow | |
17 | 2 | Bolts | |
18 | 3 | Bellows As | |
19 | 3 | Bellows As | |
20 | 10 | V Band Clamp | |
21 | 3 | Bellows As | |
22 | 1 | Exhaust Gasket | |
23 | 1 | Elbow | |
24 | 3 | Exhaust Elbows | |
25 | 2 | Bellows As | |
26 | 2 | Sleeve As | |
27 | 1 | Exhaust Manifold Gp | |
28 | 1 | Exhaust Manifold Gp | |
29 | 1 | Exhaust Manifold Gp | |
30 | 2 | Bolts | |
31 | 4 | Bolts | |
32 | 24 | Spacers | |
33 | 2 | Adapters | |
34 | 1 | Exhaust Manifold Gp | |
35 | 1 | Exhaust Manifold Gp | |
36 | 1 | Sleeve | |
37 | 8 | Spacers | |
38 | 48 | Hard Washers | |
39 | 4 | Bolts | |
40 | 16 | Bolts | |
41 | 56 | Bolts | |
42 | 48 | Bolts |
Show/hide table
Effective Serial Numbers |
---|
S/N:SK300111-UP |
S/N:SK500128-UP |
S/N:MLX00108-UP |
Caterpillar Information System:
C9.3 Marine Auxiliary Engines Safety Messages
XQP500 Generator Sets Electrical System
C7.1 Marine Engine Fuel Priming Pump - Remove and Install
3512E Tier 4 Final Engines for Land Electric Drilling Engine Shutdown Occurs Intermittently
C4.4 (Mech) Industrial Engine Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
C4.4 (Mech) Industrial Engine Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
3512E Tier 4 Final Engines for Land Electric Drilling Acceleration Is Poor or Throttle Response Is Poor
3512E Engines Flywheel Housing - Remove and Install
3512E Tier 4 Final Engines for Land Electric Drilling Engine Stalls at Low RPM
3512E Tier 4 Final Engines for Land Electric Drilling Engine Top Speed Is Not Obtained
3512E Tier 4 Final Engines for Land Electric Drilling Power Is Intermittently Low or Power Cutout Is Intermittent
3512E Engines Crankshaft Rear Seal and Wear Sleeve - Remove and Install
The 243-2501 Fan Guard May Crack on Certain 3500 Generator Set Engines {1353, 1360} The 243-2501 Fan Guard May Crack on Certain 3500 Generator Set Engines {1353, 1360}
Inspection of the 287-8585 Bushing and Pulley Assembly on Certain 3516C Generator Set Engines {1359} Inspection of the 287-8585 Bushing and Pulley Assembly on Certain 3516C Generator Set Engines {1359}
XQP500 Generator Sets Product Lifting
C9.3 Marine Auxiliary Engines Sensors and Electrical Components
XQP500 Generator Sets Refill Capacities
3512E Engines Engine Oil Sequence Valves - Remove and Install
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734} NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
XQP500 Generator Sets Setup
3512E Engines Gear Group (Rear) - Remove and Install
XQP500 Generator Sets Product Description
C7.1 Marine Engine Fuel Filter Base - Remove and Install
3512E Engines Piston Cooling Jets - Remove and Install