The 243-2501 Fan Guard May Crack on Certain 3500 Generator Set Engines {1353, 1360} Caterpillar


The 243-2501 Fan Guard May Crack on Certain 3500 Generator Set Engines {1353, 1360}

Usage:

3516 JCG
Generator Set
3512 (S/N: JM21-UP)
3512B (S/N: JM31-UP)
3516 (S/N: JCG1-UP)
3516B (S/N: JCH1-UP; JCN1-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem

The 243-2501 Fan Guard in the 437-0094 Radiator Gp may develop cracks immediately after put into service or even while being transported to the dealer or customer site.

The radial (spoke) wires of the fan guard are breaking at the welds where the second or third circumferential wires are welded.

Solution

Service the guard with the same 243-2501 Fan Guard from the Caterpillar service parts system.

Caterpillar Information System:

An Improved Exhaust Manifold Group Is Now Used For Certain 3512E Engines {1059} An Improved Exhaust Manifold Group Is Now Used For Certain 3512E Engines {1059}
C9.3 Marine Auxiliary Engines Safety Messages
XQP500 Generator Sets Electrical System
C7.1 Marine Engine Fuel Priming Pump - Remove and Install
3512E Tier 4 Final Engines for Land Electric Drilling Engine Shutdown Occurs Intermittently
C4.4 (Mech) Industrial Engine Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
C4.4 (Mech) Industrial Engine Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
3512E Tier 4 Final Engines for Land Electric Drilling Acceleration Is Poor or Throttle Response Is Poor
3512E Engines Flywheel Housing - Remove and Install
3512E Tier 4 Final Engines for Land Electric Drilling Engine Stalls at Low RPM
3512E Tier 4 Final Engines for Land Electric Drilling Engine Top Speed Is Not Obtained
3512E Tier 4 Final Engines for Land Electric Drilling Power Is Intermittently Low or Power Cutout Is Intermittent
Inspection of the 287-8585 Bushing and Pulley Assembly on Certain 3516C Generator Set Engines {1359} Inspection of the 287-8585 Bushing and Pulley Assembly on Certain 3516C Generator Set Engines {1359}
XQP500 Generator Sets Product Lifting
C9.3 Marine Auxiliary Engines Sensors and Electrical Components
XQP500 Generator Sets Refill Capacities
3512E Engines Engine Oil Sequence Valves - Remove and Install
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734} NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
XQP500 Generator Sets Setup
3512E Engines Gear Group (Rear) - Remove and Install
XQP500 Generator Sets Product Description
C7.1 Marine Engine Fuel Filter Base - Remove and Install
3512E Engines Piston Cooling Jets - Remove and Install
Inadvertent Advanced Control Joystick (ACJ) Float Control Activation Occurs On Certain Motor Graders {3168, 4343, 5063, 5705, 7000} Inadvertent Advanced Control Joystick (ACJ) Float Control Activation Occurs On Certain Motor Graders {3168, 4343, 5063, 5705, 7000}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.