Product Identification Number
Frá og með fyrsta ársfjórðungi 2001 breyttist auðkennisnúmerið (PIN) úr 8 í 17 stafi. Til að veita einkvæmt tækjakenni eru framleiðendur vinnuvéla að gera ráðstafanir til að hlíta nýjustu útgáfu af talnastaðli vöruauðkenna. Auðkennisnúmer vinnuvéla til notkunar utan vega eru skilgreind í ISO 10261. Nýja PIN-sniðið mun eiga við um allar vélar og rafalssett. PIN-plöturnar og merkingar á grind munu sýna 17 stafa PIN-númer. Nýja sniðið mun líta út á eftirfarandi hátt:
Show/hide table
Skýringarmynd 1 | g03891925 |
Hvar:
1. Alþjóðlegur framleiðslukóði (stafafjöldi 1-3)
2. Vélarlýsir (stafafjöldi 4-8)
3. Gátstafur (stafur 9)
4. Vélavísishluti (MIS-númer) eða raðnúmer vöru (stafafjöldi 10-17). Þetta var áður kallað raðnúmer.
Vélar og rafalssett sem voru framleidd fyrir fyrsta ársfjórðung 2001 munu halda 8 stafa PIN-sniði sínu.
Íhlutir eins og vélar, gírkassar, öxlar o.s.frv. og verkfæri munu áfram nota 8 stafa raðnúmer.
Caterpillar Information System:
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490} Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
G3612 and G3616 Engines Water Pump Seal - Install
C1.7 and C2.2 Industrial Engines Fuel System Secondary Filter - Replace
G3612 and G3616 Engines Water Pump Seal - Remove
A New Snubber Is Now Used on Certain C18 Marine Engines {1274} A New Snubber Is Now Used on Certain C18 Marine Engines {1274}
C13 and C15 Engines for Combat and Tactical Vehicles Engine Temperature Sensor Open or Short Circuit - Test
C3.3B and C3.8 Engines for Caterpillar Built Machines DEF Line Heater - Test
No Fault Found for 379-0150 Fuel Injection Pump Gp for C9.3 Engines {1251} No Fault Found for 379-0150 Fuel Injection Pump Gp for C9.3 Engines {1251}
G3508J, G3516J, and G3520J Engines Engine Oil Filter Housing - Assemble
C3.3B and C3.8 Engines for Caterpillar Built Machines SCR Catalyst Has Incorrect Inlet Temperature
G3508J, G3516J, and G3520J Engines Engine Oil Filter Housing - Disassemble
C3.3B and C3.8 Engines for Caterpillar Built Machines DEF Tank Temperature Is Low
A New Exhaust Manifold Band Clamp Is Used on Certain 3500 Locomotive and Marine Engines {1059} A New Exhaust Manifold Band Clamp Is Used on Certain 3500 Locomotive and Marine Engines {1059}
2015/09/23 A Procedure for Piston and Piston Pin Break-In for Certain C18 Engines is Now Available {1225}
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System General Information
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Remove
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Disassemble
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Assemble
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Install
G3508J, G3516J, and G3520J Engines Engine Oil Pan - Disassemble
G3508J, G3516J, and G3520J Engines Engine Oil Pan - Assemble
G3508J, G3516J, and G3520J Engines Engine Oil Sequence Valves - Remove and Install
G3508J, G3516J, and G3520J Engines Drive Housing (Front) - Remove and Install
G3508J, G3516J, and G3520J Engines Flywheel Housing - Remove