Engine Oil Pan - Assemble
- Position tube assembly (7) and the O-ring seals. Install the flange and bolts (5).
- Install the O-ring seals and housing (8). Install bolts (9) and the washers.
- Install suction tube (10) into housing (8).
- Install elbow (11) on suction tube (10) and install bolts (6) and the plate.
Show/hide table
Illustration 2 g01004297 - Position the gasket and install engine oil level gauge (4).
Show/hide table
Illustration 3 g01349758 - Install screen assembly (3).
Show/hide table
Illustration 4 g01349756 - Install the O-ring seals on cover (1) and cover (2). Install cover (1) and cover (2).
Show/hide table
Illustration 1 | g01689438 |
End By:
- Install the engine oil pan.
Caterpillar Information System:
G3508J, G3516J, and G3520J Engines Engine Oil Pan - Disassemble
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Install
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Assemble
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Disassemble
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Remove
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System General Information
2015/09/23 A Procedure for Piston and Piston Pin Break-In for Certain C18 Engines is Now Available {1225}
A New Exhaust Manifold Band Clamp Is Used on Certain 3500 Locomotive and Marine Engines {1059} A New Exhaust Manifold Band Clamp Is Used on Certain 3500 Locomotive and Marine Engines {1059}
725C2 Articulated Truck Product Identification Number
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490} Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
G3612 and G3616 Engines Water Pump Seal - Install
C1.7 and C2.2 Industrial Engines Fuel System Secondary Filter - Replace
G3508J, G3516J, and G3520J Engines Engine Oil Sequence Valves - Remove and Install
G3508J, G3516J, and G3520J Engines Drive Housing (Front) - Remove and Install
G3508J, G3516J, and G3520J Engines Flywheel Housing - Remove
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Diagnostic Trouble Codes
794 AC Off-Highway Truck Machine Systems Hydraulic Tank (Brake, Hoist, Steering) - Remove and Install
G3508J, G3516J, and G3520J Engines Flywheel Housing - Install
G3508J, G3516J, and G3520J Engines Crankshaft Front Seal and Wear Sleeve - Remove
G3508J, G3516J, and G3520J Engines Crankshaft Front Seal and Wear Sleeve - Install
G3508J, G3516J, and G3520J Engines Crankshaft Rear Seal and Wear Sleeve - Remove
G3508J, G3516J, and G3520J Engines Crankshaft Rear Seal and Wear Sleeve - Install
G3508J, G3516J, and G3520J Engines Accessory Drive (Front) - Disassemble
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Fuel Rail Pressure Is High