Engine Oil Pan - Disassemble
Start By:
- Remove the engine oil pan.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove cover (1), cover (2), and the O-ring seals.
Show/hide table
Illustration 2 g01349758 - Remove screen assembly (3).
Show/hide table
Illustration 3 g01004297 - Remove engine oil level gauge (4).
Show/hide table
Illustration 4 g01689438 - Remove bolts (6) from the plate and elbow (11). Remove suction tube (10) and elbow (11).
- Remove bolts (9) and the washers. Remove housing (8) from tube assembly (7).
- Remove the flange, bolts (5), tube assembly (7), and the O-ring seals.
Show/hide table
Illustration 1 | g01349756 |
Caterpillar Information System:
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Install
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Assemble
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Disassemble
G3508J, G3516J, and G3520J Engines Engine Oil and Water Pump Drive - Remove
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System General Information
2015/09/23 A Procedure for Piston and Piston Pin Break-In for Certain C18 Engines is Now Available {1225}
A New Exhaust Manifold Band Clamp Is Used on Certain 3500 Locomotive and Marine Engines {1059} A New Exhaust Manifold Band Clamp Is Used on Certain 3500 Locomotive and Marine Engines {1059}
725C2 Articulated Truck Product Identification Number
Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490} Overspeed Guidance for 3500 and C175 Machine Engines{1000, 1915, 7410, 7427, 7490}
G3612 and G3616 Engines Water Pump Seal - Install
C1.7 and C2.2 Industrial Engines Fuel System Secondary Filter - Replace
G3612 and G3616 Engines Water Pump Seal - Remove
G3508J, G3516J, and G3520J Engines Engine Oil Pan - Assemble
G3508J, G3516J, and G3520J Engines Engine Oil Sequence Valves - Remove and Install
G3508J, G3516J, and G3520J Engines Drive Housing (Front) - Remove and Install
G3508J, G3516J, and G3520J Engines Flywheel Housing - Remove
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Diagnostic Trouble Codes
794 AC Off-Highway Truck Machine Systems Hydraulic Tank (Brake, Hoist, Steering) - Remove and Install
G3508J, G3516J, and G3520J Engines Flywheel Housing - Install
G3508J, G3516J, and G3520J Engines Crankshaft Front Seal and Wear Sleeve - Remove
G3508J, G3516J, and G3520J Engines Crankshaft Front Seal and Wear Sleeve - Install
G3508J, G3516J, and G3520J Engines Crankshaft Rear Seal and Wear Sleeve - Remove
G3508J, G3516J, and G3520J Engines Crankshaft Rear Seal and Wear Sleeve - Install
G3508J, G3516J, and G3520J Engines Accessory Drive (Front) - Disassemble