Machine Interlocks
機器聯鎖可以防止機器不當運作。 此機器不應在該等狀況下運作。 某些狀況會妨礙正常運作。 這些狀況會以系統問題的形式向駕駛員顯示。 機器駕駛員和地面操作員在操作機器之前均需要熟悉所有的機器聯鎖。 機器駕駛員可以使用以下指南,來確定聯鎖是否妨礙正常運作。
有以下情形時,引擎將不會發動:
- 六個遠端停止開關中的任何一個已按下。
- 啟動緊急停止開關後,所有控制裝置都需要重設成正中位置 (鬆開按鈕),所有功能才能正常運作。
有以下情形時,機器將不會推進:
- 轉子檢修門開啟。
- 機器控制系統偵測到推進系統中有故障。 監控系統上會顯示錯誤訊息。
- 進料器回轉鎖定已解鎖。
- 一或多個機器支柱伸長超過預檢修高度。
有以下情形時,機器前部將不會降下:
- 轉子檢修門開啟。
附註轉子檢修門開啟時,沒有聯鎖可用來升起機器。
有以下情形時,所有上升控制裝置將無法運作:
- 進料器回轉鎖定已解鎖。
- 轉子檢修門開啟,且機器的所有支柱都處於最大延伸位置。
有以下情形時,無法由後方履帶轉向:
- 轉子檢修門開啟。
- 機器控制系統偵測到轉向系統中有故障。
- 進料器回轉鎖定已解鎖。
有下列情形時,轉子不會接合:
- 轉子檢修門開啟。
- 機器控制系統偵測到轉子控制裝置中有故障。
- 進料器回轉鎖定已解鎖。
有下列情形時,轉子檢修門將無法開啟:
- 後支柱不是處於檢修高度位置。
- 進料器回轉鎖定已解鎖。
有下列情形時,進料器無法運作:
- 進料器回轉鎖定已解鎖。
Caterpillar Information System:
3512C and 3516C Industrial Engines Water Lines
3512C and 3516C Industrial Engines Fuel Injection Lines
3512C and 3516C Industrial Engines Fuel Injection Lines
3512C and 3516C Industrial Engines Air Lines
C9.3 Marine Engine Engine Control Module - Remove and Install
C9.3 Marine Engine Belt Tensioner - Remove and Install
C9.3 Marine Engine Inlet Manifold Pressure Sensor - Remove and Install
C9.3 Marine Engine Inlet Manifold Temperature Sensor - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Relay - Test - ECM Main Relay
C9.3 Marine Engine Speed/Timing Sensor - Remove and Install
C9.3 Marine Engine Fuel Pressure Sensor - Remove and Install
C280-08 Tier 4 Engine Air Inlet Shutoff - Remove and Install
C9.3 Marine Engine Electric Starting Motor - Remove and Install - 24V Electric
3406E Engine Cylinder Head - Install
C9.3 Marine Engine Electric Starting Motor - Remove and Install - Dual Start - 24V Electric and Air Start
C2.2 Engines For Caterpillar Built Machines Sensor Supply - Test
C9.3 Marine Engine Electric Starting Motor - Remove and Install - 12V Electric
G3606 and G3608 Engines Aftercooler - Assemble
PM820, PM822, and PM825 Cold Planer Track Tension - Check/Adjust
C9.3 Marine Engine Heat Exchanger - Remove and Install
C7 and C9 Industrial Engines Component Location
C7 and C9 Industrial Engines Configuration Parameters
C7 and C9 Industrial Engines Coolant Temperature Is High
C7 and C9 Industrial Engines Fuel Pressure Is High