Water Lines
Show/hide table
Illustration 1 | g03837148 |
Show/hide table
Specification for 283-4197 Water Lines Gp     | |||
---|---|---|---|
Item     | Qty     | Part     | Specification Description     |
1     | 2     | 6V-1943 High Temperature Bolt     | Before assembly, lightly lubricate the threads and bearing surface with Loctite C5A copper anti-seize. Tighten to 55 ± 10 N·m (41 ± 7 lb ft).     |
2     | 12     | 3B-1915 Bolt     | Before assembly, lightly lubricate the threads and bearing surface with Loctite C5A copper anti-seize.     |
3     | 4     | 0S-1608 Bolt     | Before assembly, lightly lubricate the threads and bearing surface with Loctite C5A copper anti-seize.     |
4     | 4     | 8L-2786 O-Ring Seal     | Before assembly, lightly lubricate the bore with glycerin or approved equivalent.     |
5     | 16     | 0S-1594 Bolt     | Before assembly, lightly lubricate the threads and bearing surface with Loctite C5A copper anti-seize.     |
Caterpillar Information System:
3512C and 3516C Industrial Engines Fuel Injection Lines
3512C and 3516C Industrial Engines Fuel Injection Lines
3512C and 3516C Industrial Engines Air Lines
C9.3 Marine Engine Engine Control Module - Remove and Install
C9.3 Marine Engine Belt Tensioner - Remove and Install
C9.3 Marine Engine Inlet Manifold Pressure Sensor - Remove and Install
C9.3 Marine Engine Inlet Manifold Temperature Sensor - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Relay - Test - ECM Main Relay
C9.3 Marine Engine Speed/Timing Sensor - Remove and Install
C9.3 Marine Engine Fuel Pressure Sensor - Remove and Install
C280-08 Tier 4 Engine Air Inlet Shutoff - Remove and Install
C280-08 Tier 4 Engine Turbocharger - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Interlocks
C9.3 Marine Engine Electric Starting Motor - Remove and Install - 24V Electric
3406E Engine Cylinder Head - Install
C9.3 Marine Engine Electric Starting Motor - Remove and Install - Dual Start - 24V Electric and Air Start
C2.2 Engines For Caterpillar Built Machines Sensor Supply - Test
C9.3 Marine Engine Electric Starting Motor - Remove and Install - 12V Electric
G3606 and G3608 Engines Aftercooler - Assemble
PM820, PM822, and PM825 Cold Planer Track Tension - Check/Adjust
C9.3 Marine Engine Heat Exchanger - Remove and Install
C7 and C9 Industrial Engines Component Location
C7 and C9 Industrial Engines Configuration Parameters
C7 and C9 Industrial Engines Coolant Temperature Is High