Electric Starting Motor - Remove and Install - 12V Electric
Show/hide table
Personal injury can result from failure to disconnect the battery. First, disconnect the negative battery cable. Then, disconnect the positive battery cable. A positive power lead can cause sparks if the battery is not disconnected. Sparks can possibly result in battery explosion or fire. |
- Disconnect batteries.
Show/hide table
Illustration 1 g03837344 - Disconnect harness assembly (1), harness assembly (2), and harness assembly (3).
Show/hide table
Illustration 2 g03837377 - Remove bolts (5) and electric starting motor (4).
- Install electric starting motor (4) in the reverse order of removal.
Caterpillar Information System:
C2.2 Engines For Caterpillar Built Machines Sensor Supply - Test
C9.3 Marine Engine Electric Starting Motor - Remove and Install - Dual Start - 24V Electric and Air Start
3406E Engine Cylinder Head - Install
C9.3 Marine Engine Electric Starting Motor - Remove and Install - 24V Electric
PM820, PM822, and PM825 Cold Planer Machine Interlocks
3512C and 3516C Industrial Engines Water Lines
3512C and 3516C Industrial Engines Fuel Injection Lines
3512C and 3516C Industrial Engines Fuel Injection Lines
3512C and 3516C Industrial Engines Air Lines
C9.3 Marine Engine Engine Control Module - Remove and Install
C9.3 Marine Engine Belt Tensioner - Remove and Install
C9.3 Marine Engine Inlet Manifold Pressure Sensor - Remove and Install
G3606 and G3608 Engines Aftercooler - Assemble
PM820, PM822, and PM825 Cold Planer Track Tension - Check/Adjust
C9.3 Marine Engine Heat Exchanger - Remove and Install
C7 and C9 Industrial Engines Component Location
C7 and C9 Industrial Engines Configuration Parameters
C7 and C9 Industrial Engines Coolant Temperature Is High
C7 and C9 Industrial Engines Fuel Pressure Is High
G3606 and G3608 Engines Turbocharger - Remove
C7 and C9 Industrial Engines Fuel Pressure Is Low
C7 and C9 Industrial Engines Intake Manifold Air Temperature Is High
3500B Engines for Caterpillar Built Power Modules Alternator Mounting
3512E Engines for Well Stimulation Pumps Exhaust Elbow