Air Lines
Show/hide table
 | |
| Illustration 1 | g03837083 |
Top view | |
Show/hide table
| Specification for 338-3649 Air Lines Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 16 | 216-2211 Clamp | Use the following procedure to tighten the clamp: 1. Center clamps within the marking on the hose. 2. Orient clamps, so that T-bolts are at minimum 90 degree apart. 3. Tighten the clamp to 10 ± 2 N·m (89 ± 18 lb in). |
Show/hide table
 | |
| Illustration 2 | g03837084 |
Front view | |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 2 | 8 | 6V-3917 O-Ring Seal | Lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
| 4 | 8 | 6V-1943 High Temperature Bolt | Before assembly, apply Never-Seez Marine grade to the threads. Torque to 55 ± 10 N·m (41 ± 7 lb ft). |
Caterpillar Information System:
C9.3 Marine Engine Engine Control Module - Remove and Install
C9.3 Marine Engine Belt Tensioner - Remove and Install
C9.3 Marine Engine Inlet Manifold Pressure Sensor - Remove and Install
C9.3 Marine Engine Inlet Manifold Temperature Sensor - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Relay - Test - ECM Main Relay
C9.3 Marine Engine Speed/Timing Sensor - Remove and Install
C9.3 Marine Engine Fuel Pressure Sensor - Remove and Install
C280-08 Tier 4 Engine Air Inlet Shutoff - Remove and Install
C280-08 Tier 4 Engine Turbocharger - Remove and Install
C280-08 Tier 4 Engine Aftercooler - Remove and Install
C280-08 Tier 4 Engine Exhaust Manifold - Remove and Install
C9.3 Marine Engine Engine Oil Pressure Sensor - Remove and Install
3512C and 3516C Industrial Engines Fuel Injection Lines
3512C and 3516C Industrial Engines Fuel Injection Lines
3512C and 3516C Industrial Engines Water Lines
PM820, PM822, and PM825 Cold Planer Machine Interlocks
C9.3 Marine Engine Electric Starting Motor - Remove and Install - 24V Electric
3406E Engine Cylinder Head - Install
C9.3 Marine Engine Electric Starting Motor - Remove and Install - Dual Start - 24V Electric and Air Start
C2.2 Engines For Caterpillar Built Machines Sensor Supply - Test
C9.3 Marine Engine Electric Starting Motor - Remove and Install - 12V Electric
G3606 and G3608 Engines Aftercooler - Assemble
PM820, PM822, and PM825 Cold Planer Track Tension - Check/Adjust
C9.3 Marine Engine Heat Exchanger - Remove and Install