Fuel Injection Lines
Show/hide table
Illustration 1 | g03837092 |
Show/hide table
Specification for 463-0336 Fuel Injection Lines Gp     | |||
---|---|---|---|
Item     | Qty     | Part     | Specification Description     |
1     | 12     | 1D-4539 Bolt     | Tighten to 25 ± 6 N·m (221 ± 53 lb in).     |
2     | 1     | 9N-4053 Spring     | Length under test force is 28.4 mm (1.12 inch). Test force is 40.79 ± 2.05 N (9.17 ± 0.46 lb). Free length after test force is 57.15 mm (2.250 inch).     |
Caterpillar Information System:
3512C and 3516C Industrial Engines Fuel Injection Lines
3512C and 3516C Industrial Engines Air Lines
C9.3 Marine Engine Engine Control Module - Remove and Install
C9.3 Marine Engine Belt Tensioner - Remove and Install
C9.3 Marine Engine Inlet Manifold Pressure Sensor - Remove and Install
C9.3 Marine Engine Inlet Manifold Temperature Sensor - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Relay - Test - ECM Main Relay
C9.3 Marine Engine Speed/Timing Sensor - Remove and Install
C9.3 Marine Engine Fuel Pressure Sensor - Remove and Install
C280-08 Tier 4 Engine Air Inlet Shutoff - Remove and Install
C280-08 Tier 4 Engine Turbocharger - Remove and Install
C280-08 Tier 4 Engine Aftercooler - Remove and Install
3512C and 3516C Industrial Engines Water Lines
PM820, PM822, and PM825 Cold Planer Machine Interlocks
C9.3 Marine Engine Electric Starting Motor - Remove and Install - 24V Electric
3406E Engine Cylinder Head - Install
C9.3 Marine Engine Electric Starting Motor - Remove and Install - Dual Start - 24V Electric and Air Start
C2.2 Engines For Caterpillar Built Machines Sensor Supply - Test
C9.3 Marine Engine Electric Starting Motor - Remove and Install - 12V Electric
G3606 and G3608 Engines Aftercooler - Assemble
PM820, PM822, and PM825 Cold Planer Track Tension - Check/Adjust
C9.3 Marine Engine Heat Exchanger - Remove and Install
C7 and C9 Industrial Engines Component Location
C7 and C9 Industrial Engines Configuration Parameters