XQC1200 and XQC1600 Power Modules Caterpillar


Crankcase Pressure Sensor - Remove and Install

Usage:

XQC1200 N1G

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g03798996

  1. Disconnect the harness assembly and remove crankcase pressure sensor (1).

  2. Remove the O-ring seal from the crankcase pressure sensor.

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 2g03798996

  1. Install a new O-ring seal on the crankcase pressure sensor (1).

  2. Install crankcase pressure sensor (1) and tighten to a torque of 10 ± 2 N·m (89 ± 18 lb in).

  3. Connect the harness assembly.

Caterpillar Information System:

3512E Tier 4 Final Engines for Land Electric Drilling Fuel Rail Pressure Problem
G3612 and G3616 Engines Crankcase Pressure Sensor - Remove and Install
C8.7 Marine Engine Engine Support (Rear) - Remove and Install
C8.7 Marine Engine Engine Support (Front) - Remove and Install
C9.3 Marine Engines Piston and Rings
C9.3 Marine Engines Pressure Sensor (Auxiliary)
XQ400 Power Module Voltage Regulators
C4.4 Generator Sets Fuel System Secondary Filter - Replace
3412 Generator Set Engine Shutdown Occurs Intermittently
C4.4 Generator Sets Engine Oil and Filter - Change
794 AC Off-Highway Truck Brakes, Indicators and Gauges - Test
3412 Generator Set Engine Overspeeds
2015/02/27 A New Method to Prevent Water from Being Trapped in Fuel Heaters is Available {1250, 1296}
C8.7 Marine Engine Water Temperature Regulator - Remove and Install
New Sensor Kit Is Now Used On Certain Cat® Products {1000, 1439, 1718, 1906, 1907, 1912, 1917, 1923, 1924, 1925, 1929, 7400, 7422} New Sensor Kit Is Now Used On Certain Cat® Products {1000, 1439, 1718, 1906, 1907, 1912, 1917, 1923, 1924, 1925, 1929, 7400, 7422}
C18 Generator Set Walk-Around Inspection
C18 Generator Set Water Pump - Inspect
C18 Generator Set Plate Locations and Film Locations
Jacket Water Lines May Leak On Certain 3500 Power Modules{1380} Jacket Water Lines May Leak On Certain 3500 Power Modules{1380}
C7.1 Engines Exhaust System Contains Coolant
G3612 and G3616 Engines Spark Plugs - Remove and Install
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Maintenance Interval Schedule
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Maintenance Interval Schedule
3512E HD Petroleum Engine Model View Illustrations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.