Model View Illustrations
The following illustrations show various typical features of a 3512E Tier4 Engine with exhaust converter assemblies. The illustrations do not show all the options and configurations that are available.
Show/hide table
Illustration 1 | g06062378 |
3512E SCAC Right Side View (1) Air cleaner (2) Muffler (3) Converter (4) Air cleaner differential pressure sensor (5) Air filter service indicator (6) Alternator (7) Coolant sampling ports (8) Oil cooler (9) Engine oil filters (10) Engine oil sampling port (11) Air cleaner pre-cleaner |
Show/hide table
Illustration 2 | g06062421 |
3512E SCAC Left Side View (1) Cooling system thermostatic valves (2) Electronic control module (ECM) (3) Fuel pump (4) Engine oil drain (5) Engine oil level gauge (6) Wireless communication device switch (7) Secondary fuel filter (8) Engine oil filler (9) Starter motor |
Show/hide table
Illustration 3 | g06063540 |
3512E ATAAC Right Side View (1) Air cleaner (2) Muffler (3) Converter (4) Air cleaner differential pressure sensor (5) Air filter service indicator (6) Alternator (7) Coolant sampling ports (8) Oil cooler (9) Engine oil filters (10) Engine oil sampling port (11) Air cleaner pre-cleaner |
Show/hide table
Illustration 4 | g06063548 |
3512E ATAAC Left Side View (1) Cooling system thermostatic valves (2) Electronic control module (ECM) (3) Fuel pump (4) Wireless communication device switch (5) Engine oil drain (6) Secondary fuel filter (7) Engine oil level gauge (8) Starter motor (9) Engine oil filler |
Show/hide table
Illustration 5 | g06062454 |
3512E SCAC Top View (1) Lifting eyes (2) EGR coolers |
Show/hide table
Illustration 6 | g06062544 |
3512E SCAC Front View (1) Air shutoff (2) Aftercooler (3) Vibration damper |
Caterpillar Information System:
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Maintenance Interval Schedule
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Maintenance Interval Schedule
G3612 and G3616 Engines Spark Plugs - Remove and Install
C7.1 Engines Exhaust System Contains Coolant
Jacket Water Lines May Leak On Certain 3500 Power Modules{1380} Jacket Water Lines May Leak On Certain 3500 Power Modules{1380}
C18 Generator Set Plate Locations and Film Locations
C18 Generator Set Water Pump - Inspect
C18 Generator Set Walk-Around Inspection
New Sensor Kit Is Now Used On Certain Cat® Products {1000, 1439, 1718, 1906, 1907, 1912, 1917, 1923, 1924, 1925, 1929, 7400, 7422} New Sensor Kit Is Now Used On Certain Cat® Products {1000, 1439, 1718, 1906, 1907, 1912, 1917, 1923, 1924, 1925, 1929, 7400, 7422}
C8.7 Marine Engine Water Temperature Regulator - Remove and Install
2015/02/27 A New Method to Prevent Water from Being Trapped in Fuel Heaters is Available {1250, 1296}
XQC1200 and XQC1600 Power Modules Crankcase Pressure Sensor - Remove and Install
3516C Marine Engines Flywheel Housing - Remove and Install
3512E HD Petroleum Engine Engine Oil Level - Check
C4.4 Engines Exhaust System Contains Coolant
C2.2 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
C18 Generator Set Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.1/4.2 If equipped
G3612 and G3616 Engines Exhaust Bypass - Remove and Install
C1.7 and C2.2 Industrial Engines Electric Starting Motor
C2.2 Engines for Caterpillar Built Machines Rocker Shaft - Disassemble
C2.2 Engines for Caterpillar Built Machines Alternator and Regulator
G3612 and G3616 Engines Exhaust Bypass - Disassemble
3516C Marine Engines Valve Cover Base - Remove and Install
3516E Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install