C18 Generator Set Caterpillar


Plate Locations and Film Locations

Usage:

C18 BG4

Generator Set Identification




Illustration 1g01185578

(1) Location of the identification plate for the generator set

The generator set consists of the generator and the engine. The location of the identification plate for the generator set is shown in illustration 2.

Serial Number Plate




Illustration 2g01185411

Right Side View of Engine Only

(2) Location of serial number plate

The Engine Serial Number Plate contains the following information:

  • Engine serial number ____________________

  • Engine model number ____________________

  • Arrangement number ____________________

Engine Information Plate




Illustration 3g01185515

(3) Location of the engine information plate

The Engine Information Plate contains the following information:

  • Engine serial number ____________________

  • Arrangement number ____________________

  • Compression ratio ____________________

  • Aftercooler temperature ____________________

  • Power ____________________

  • Full load RPM ____________________

Generator Identification Plate




Illustration 4g01185532

Location of the generator identification plate

The generator identification is located on the side of the generator.

The generator identification film includes the following information:

  • Serial number for the generator ____________________

  • Generator model number ____________________

Generator Set Specification Film

The generator set specification film is on generator sets that are going into India




Illustration 5g03801581

Sound Certification Film




Illustration 6g03801582

Caterpillar Information System:

C18 Generator Set Water Pump - Inspect
C18 Generator Set Walk-Around Inspection
New Sensor Kit Is Now Used On Certain Cat® Products {1000, 1439, 1718, 1906, 1907, 1912, 1917, 1923, 1924, 1925, 1929, 7400, 7422} New Sensor Kit Is Now Used On Certain Cat® Products {1000, 1439, 1718, 1906, 1907, 1912, 1917, 1923, 1924, 1925, 1929, 7400, 7422}
C8.7 Marine Engine Water Temperature Regulator - Remove and Install
2015/02/27 A New Method to Prevent Water from Being Trapped in Fuel Heaters is Available {1250, 1296}
XQC1200 and XQC1600 Power Modules Crankcase Pressure Sensor - Remove and Install
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Rail Pressure Problem
G3612 and G3616 Engines Crankcase Pressure Sensor - Remove and Install
C8.7 Marine Engine Engine Support (Rear) - Remove and Install
C8.7 Marine Engine Engine Support (Front) - Remove and Install
C9.3 Marine Engines Piston and Rings
C9.3 Marine Engines Pressure Sensor (Auxiliary)
Jacket Water Lines May Leak On Certain 3500 Power Modules{1380} Jacket Water Lines May Leak On Certain 3500 Power Modules{1380}
C7.1 Engines Exhaust System Contains Coolant
G3612 and G3616 Engines Spark Plugs - Remove and Install
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Maintenance Interval Schedule
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Maintenance Interval Schedule
3512E HD Petroleum Engine Model View Illustrations
3516C Marine Engines Flywheel Housing - Remove and Install
3512E HD Petroleum Engine Engine Oil Level - Check
C4.4 Engines Exhaust System Contains Coolant
C2.2 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
C18 Generator Set Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.1/4.2 If equipped
G3612 and G3616 Engines Exhaust Bypass - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.