Engine Support (Rear) - Remove and Install
Removal Procedure
- Attach a suitable lifting device to the engine. The weight of the engine is approximately 1135 kg (2500 lb). Remove four bolts (1) and remove rear engine support (2) from each side of the engine.
Show/hide table
 | |
| Illustration 1 | g03798795 |
Installation Procedure
- Install rear engine support (2) in the reverse order of removal.
- Tighten four bolts (1) to a torque of 190 ± 20 N·m (140 ± 15 lb ft)
Caterpillar Information System:
C8.7 Marine Engine Engine Support (Front) - Remove and Install
C9.3 Marine Engines Piston and Rings
C9.3 Marine Engines Pressure Sensor (Auxiliary)
XQ400 Power Module Voltage Regulators
C4.4 Generator Sets Fuel System Secondary Filter - Replace
3412 Generator Set Engine Shutdown Occurs Intermittently
C4.4 Generator Sets Engine Oil and Filter - Change
794 AC Off-Highway Truck Brakes, Indicators and Gauges - Test
3412 Generator Set Engine Overspeeds
3412 Generator Set Engine Misfires, Runs Rough or Is Unstable
C4.4 Generator Sets Generator Operation
3412 Generator Set Engine Does Not Crank
G3612 and G3616 Engines Crankcase Pressure Sensor - Remove and Install
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Rail Pressure Problem
XQC1200 and XQC1600 Power Modules Crankcase Pressure Sensor - Remove and Install
2015/02/27 A New Method to Prevent Water from Being Trapped in Fuel Heaters is Available {1250, 1296}
C8.7 Marine Engine Water Temperature Regulator - Remove and Install
New Sensor Kit Is Now Used On Certain Cat® Products {1000, 1439, 1718, 1906, 1907, 1912, 1917, 1923, 1924, 1925, 1929, 7400, 7422} New Sensor Kit Is Now Used On Certain Cat® Products {1000, 1439, 1718, 1906, 1907, 1912, 1917, 1923, 1924, 1925, 1929, 7400, 7422}
C18 Generator Set Walk-Around Inspection
C18 Generator Set Water Pump - Inspect
C18 Generator Set Plate Locations and Film Locations
Jacket Water Lines May Leak On Certain 3500 Power Modules{1380} Jacket Water Lines May Leak On Certain 3500 Power Modules{1380}
C7.1 Engines Exhaust System Contains Coolant
G3612 and G3616 Engines Spark Plugs - Remove and Install