New Turbocharger And Software Used {1052}
Usage:
3406E (5DS324-Up) Truck Engines
Description of Change: A new turbocharger and software are used on the 600 Hp 3406E Truck Engines to increase reliability.
Adaptable To: The new 159-8542 Turbocharger replaces the former 157-5538 Turbocharger. The new 159-9466 Software Group is used on engines without brakesavers. The new 159-9468 Software Group is used on engines with brakesavers.
Caterpillar Information System:
1999/03/01 Installing 1999 ADEM 2000 HD Engine Into Earlier ADEM II HD Engine Chassis {1901,1923}
1999/03/01 Create And Save The ECM Customer Parameters List As A Back-Up {1901}
1999/03/01 Use 145-5247 And 147-2675 Wear Sleeve Installer To Install Crankshaft Wear Sleeves {1202}
1999/03/01 Troubleshooting Guide Corrections {0350}
1999/03/01 70-Pin Breakout "T" Harness For The ADEM 2000 Truck Engine ECM {1901}
1999/03/01 Optional 4-Pin Coolant Level Sensor {1395}
1999/02/01 Air Compressor Drive Gear Holding Tool Available{0700,1803}
1999/02/01 Installation Procedure For Hydraulic Electronic Unit Injector (HEUI) Oil Pump High Pressure Oil Line{1714}
1999/01/01 Use 144-0235 Belt Tension Gauge To Check Belt Tension{7461,1357}
1999/01/01 New Two-Piece Spool And Diaphragm For BrakeSaver Control Valve Now Used{1155}
1999/01/01 Caterpillar Driver Information Display (Cat ID) Version 2.0 Release For On-Highway Truck{1920}
1999/01/01 On-Highway Heavy Duty 1999 Model Year Truck Software Release{1920}
1999/03/01 New O-Ring Seals For Unit Injector Sleeves {1125}
1999/03/01 Atmospheric Pressure Sensor Design Improvements {1901,1923}
1999/04/01 New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999{1261}
1999/04/01 Hydraulic Electronic Unit Injector (HEUI) Pump Service Tips{1714}
1999/04/01 Exhaust Brakes May Need To Be Modified Or Replaced{1093}
1999/04/01 New Valve Lifter Assemblies (Full Body Roller Follower) And New Lifter Guide Springs Used{1209}
1999/04/01 Remove Engine Oil Pan To Determine Source Of Internal Coolant Leakage{1302,1348,1361,1395}
1999/04/01 New Integral Seal (Air Compressor Mounting Seal) Available{1803}
1999/04/01 New Cooling System Vent Line Check Valve Helps Prevent Over Cooling{1370}
1999/05/01 New Design Of Cylinder Block And Main Bearings {1201,1203,1224}
1999/05/01 New Main Bearing Material {1203}
1999/05/01 Correction To Oil Level Gauge (Dipstick) Calibration Procedure {1326}