1999/01/01 Caterpillar

Use 144-0235 Belt Tension Gauge To Check Belt Tension{7461,1357}

Usage:

All Models

Warranty: S

Features/Benefits

* Used to check tension of belts driving components such as air compressor, air conditioning compressor, alternator, water pump, or other belt-driven attachments

* Works on "A" section belts with top width of 9.0 to 13.0 mm (.37 to .50 in) and "K" section poly-v, 4, 5, and 6 rib belts

* Increased accuracy is provided by a belt thickness compensating feature

* Has a permanent dial decal

Specifications/Technical Information

Height/width - 102 x 203 mm (4.0 x 8.0 in)

Leg span - 82.6 mm (3.25 in)

Weight - 400 g (14 oz)

Accuracy - ±10%

Range - 130 to 800 Newtons (30 to 180 lbs)

144-0235 Belt Tension Gauge

Caterpillar Information System:

1999/01/01 New Two-Piece Spool And Diaphragm For BrakeSaver Control Valve Now Used{1155}

1999/01/01 Caterpillar Driver Information Display (Cat ID) Version 2.0 Release For On-Highway Truck{1920}

1999/01/01 On-Highway Heavy Duty 1999 Model Year Truck Software Release{1920}

1999/01/01 On-Highway Heavy Duty 1999 Model Year Truck Electronic System{1900}

1999/01/01 Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}

1999/01/01 Electronic Technician (ET) Version 2.3 Update{1920}

1999/01/01 Electronic Controller Analyzer Programmer (ECAP) Truck SPM Version 2.3 Update{1920}

1998/12/01 Use 145-9342 Filter Crusher To Reduce Waste And Collect Oil{5720}

1998/12/01 Use 9U-5968 Hydrostatic Filter Group To Filter Contaminated Oil{5050,3200,3218}

1998/12/01 Use 139-2610 Or 139-2611 (CE Certified) Refrigerant Identification Instrument To Determine Refrigerant Content{1809}

1998/12/01 Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps Installation{1251,1251,1000}

1998/12/01 Use 131-5050 DataView Group And 131-5051 DataView Portable TechStation Group For Accurate Diagnostics{1000,3000,4000,5000,6000,0788}

1999/02/01 Installation Procedure For Hydraulic Electronic Unit Injector (HEUI) Oil Pump High Pressure Oil Line{1714}

1999/02/01 Air Compressor Drive Gear Holding Tool Available{0700,1803}

1999/03/01 Optional 4-Pin Coolant Level Sensor {1395}

1999/03/01 70-Pin Breakout "T" Harness For The ADEM 2000 Truck Engine ECM {1901}

1999/03/01 Troubleshooting Guide Corrections {0350}

1999/03/01 Use 145-5247 And 147-2675 Wear Sleeve Installer To Install Crankshaft Wear Sleeves {1202}

1999/03/01 Create And Save The ECM Customer Parameters List As A Back-Up {1901}

1999/03/01 Installing 1999 ADEM 2000 HD Engine Into Earlier ADEM II HD Engine Chassis {1901,1923}

1999/03/01 New Turbocharger And Software Used {1052}

1999/03/01 New O-Ring Seals For Unit Injector Sleeves {1125}

1999/03/01 Atmospheric Pressure Sensor Design Improvements {1901,1923}

1999/04/01 New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999{1261}