1998/12/01 Caterpillar

Use 9U-5968 Hydrostatic Filter Group To Filter Contaminated Oil{5050,3200,3218}

Usage:

All Models

Warranty: G

Features/Benefits

* Used to filter out contamination (particles) after catastrophic pump or motor failure

* 6 micron absolute rating

* Works in closed-loop hydrostatic hydraulic systems

* Simple to install, as rectifier block automatically routes oil through filter in correct flow direction, regardless of inlet and outlet connections.

* Can be permanently attached to system or vehicle

* Easily fitted with currently available quick disconnect fittings for fast and easy installation - one unit can serve several machines.

Specifications/Technical Information

Overall size - 300 x 250 x 558 mm (12.0 x 10.0 x 22.0 in)

Maximum working pressure - 41,364 kPa (6000 psi)

Flow rate - 342 Lpm (90 gpm)

Filter rating - 6 micron, absolute

Inlet/outlet port connection - 1-1/4 inch quick disconnect

Service Parts

9U-5966 Filter Element, 6 Micron Absolute

9U-5969 Valve, Check

9U-5967 Valve Seal Kit, Check

4C-5093 Nipple, Quick Disconnect

4C-5094 Coupler, Quick Disconnect

9U-5968 Hydrostatic Filter Group

Caterpillar Information System:

1998/12/01 Use 139-2610 Or 139-2611 (CE Certified) Refrigerant Identification Instrument To Determine Refrigerant Content{1809}

1998/12/01 Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps Installation{1251,1251,1000}

1998/12/01 Use 131-5050 DataView Group And 131-5051 DataView Portable TechStation Group For Accurate Diagnostics{1000,3000,4000,5000,6000,0788}

1998/12/01 Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView{1000,3000,4000,5000,6000}

1998/12/01 Use 149-5138 Mechanical Push/Puller For Extra Force In General Purpose Applications{0700}

1998/12/01 New 146-4080 Digital Multimeter Available For Troubleshooting Electronic Circuits{0115}

1998/12/01 New Rear Oil Cooler Bonnet{1378}

1998/12/01 New Turbocharger Supply Tube Assemblies Used{1307}

1998/12/01 Eliminate Possibility Of Engine Oil Leaks From Oil Pan Bolt{1302}

1998/12/01 New Unit Injector Sleeve And O-Ring Seals{1125}

1998/12/01 New Adjustment Procedure For Jake Brake (Models 340/340A/340B) Slave Piston Lash{1119}

1998/12/01 New Exhaust Port Sleeve Assembly{1059,1101}

1998/12/01 Use 145-9342 Filter Crusher To Reduce Waste And Collect Oil{5720}

1999/01/01 Electronic Controller Analyzer Programmer (ECAP) Truck SPM Version 2.3 Update{1920}

1999/01/01 Electronic Technician (ET) Version 2.3 Update{1920}

1999/01/01 Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}

1999/01/01 On-Highway Heavy Duty 1999 Model Year Truck Electronic System{1900}

1999/01/01 On-Highway Heavy Duty 1999 Model Year Truck Software Release{1920}

1999/01/01 Caterpillar Driver Information Display (Cat ID) Version 2.0 Release For On-Highway Truck{1920}

1999/01/01 New Two-Piece Spool And Diaphragm For BrakeSaver Control Valve Now Used{1155}

1999/01/01 Use 144-0235 Belt Tension Gauge To Check Belt Tension{7461,1357}

1999/02/01 Installation Procedure For Hydraulic Electronic Unit Injector (HEUI) Oil Pump High Pressure Oil Line{1714}

1999/02/01 Air Compressor Drive Gear Holding Tool Available{0700,1803}

1999/03/01 Optional 4-Pin Coolant Level Sensor {1395}