New 146-4080 Digital Multimeter Available For Troubleshooting Electronic Circuits{0115}
Usage:
All Models
Warranty Category: M
Features/Benefits
-
- * Used to measure duty cycle, frequency, resistance, AC/DC voltages, AC/DC currents, temperature, continuity, diode test and total harmonic distortion in percentage of line voltage or current at 50/60 Hz or as a percent of fundamental frequency
- * Features RS-232 output which can be used to connect meter to 131-5050 DataView using a 146-8488 Cable Assembly
- * Measures true RMS on AC voltage and current ranges
- * Has auto/manual ranging features
- * Can be programmed to compare measurements to a desired reference value without an external reference source
- * Has safety shutter to protect meter in the event of incorrect connections to current terminals
- * 600V fuse protected on both 10 amp and 400 milliamp range
- * Ohm meter protected to 600 volts
- * Automatic reading hold
- * Digital display backlighting can be turned ON or OFF
- * Small enough to be hand held and is protected by a rubber boot
- * Battery powered
- * CE certified
- * Used to measure duty cycle, frequency, resistance, AC/DC voltages, AC/DC currents, temperature, continuity, diode test and total harmonic distortion in percentage of line voltage or current at 50/60 Hz or as a percent of fundamental frequency
146-4080 Multimeter
Specifications/Technical Information
146-4080 Digital Multimeter Group
Optional Equipment for 146-4080 RS-232 Digital Multimeter Group
Reference
- NEHS0678; Tool Operating Manual, Operation;
- NEHS0682; Tool Operating Manual, Specification, Testing, and Maintenance
Caterpillar Information System:
1998/12/01 New Rear Oil Cooler Bonnet{1378}
1998/12/01 New Turbocharger Supply Tube Assemblies Used{1307}
1998/12/01 Eliminate Possibility Of Engine Oil Leaks From Oil Pan Bolt{1302}
1998/12/01 New Unit Injector Sleeve And O-Ring Seals{1125}
1998/12/01 New Adjustment Procedure For Jake Brake (Models 340/340A/340B) Slave Piston Lash{1119}
1998/12/01 New Exhaust Port Sleeve Assembly{1059,1101}
1998/12/01 Service Tool Compatibility With 1999 Model Year C-10, C-12, And 3406E Truck Engines{0781,1902}
1998/12/01 New Remanufactured Water Pump Groups Available{1361}
1998/12/01 New Injector Sleeve Used{1713}
1998/11/01 Use 153-9032 Portable Air Conditioning Flushing Unit To Clean Air Conditioning Lines {0714}
1998/11/01 Use Jet Guard And Long John Safety Air Guns For Cleaning Engines And Equipment {0646}
1998/11/01 New Oil Filter Base Elbow And O-Ring Seal Improves Sealing {1306}
1998/12/01 Use 149-5138 Mechanical Push/Puller For Extra Force In General Purpose Applications{0700}
1998/12/01 Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView{1000,3000,4000,5000,6000}
1998/12/01 Use 131-5050 DataView Group And 131-5051 DataView Portable TechStation Group For Accurate Diagnostics{1000,3000,4000,5000,6000,0788}
1998/12/01 Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps Installation{1251,1251,1000}
1998/12/01 Use 139-2610 Or 139-2611 (CE Certified) Refrigerant Identification Instrument To Determine Refrigerant Content{1809}
1998/12/01 Use 9U-5968 Hydrostatic Filter Group To Filter Contaminated Oil{5050,3200,3218}
1998/12/01 Use 145-9342 Filter Crusher To Reduce Waste And Collect Oil{5720}
1999/01/01 Electronic Controller Analyzer Programmer (ECAP) Truck SPM Version 2.3 Update{1920}
1999/01/01 Electronic Technician (ET) Version 2.3 Update{1920}
1999/01/01 Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01 On-Highway Heavy Duty 1999 Model Year Truck Electronic System{1900}
1999/01/01 On-Highway Heavy Duty 1999 Model Year Truck Software Release{1920}