1999/01/01 Caterpillar

Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}

Usage:

3306 (69D, 76R),
3306B (63Z) Truck Engines

Caterpillar recommends using 8T-2998 Camshaft and Follower Lubricant during rebuild and assembly of engines. 8T-2998 Camshaft and Follower Lubricant provides necessary lubrication and prevents galling of camshaft lobes at startup.

Caterpillar Information System:

1999/01/01 Electronic Technician (ET) Version 2.3 Update{1920}

1999/01/01 Electronic Controller Analyzer Programmer (ECAP) Truck SPM Version 2.3 Update{1920}

1998/12/01 Use 145-9342 Filter Crusher To Reduce Waste And Collect Oil{5720}

1998/12/01 Use 9U-5968 Hydrostatic Filter Group To Filter Contaminated Oil{5050,3200,3218}

1998/12/01 Use 139-2610 Or 139-2611 (CE Certified) Refrigerant Identification Instrument To Determine Refrigerant Content{1809}

1998/12/01 Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps Installation{1251,1251,1000}

1998/12/01 Use 131-5050 DataView Group And 131-5051 DataView Portable TechStation Group For Accurate Diagnostics{1000,3000,4000,5000,6000,0788}

1998/12/01 Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView{1000,3000,4000,5000,6000}

1998/12/01 Use 149-5138 Mechanical Push/Puller For Extra Force In General Purpose Applications{0700}

1998/12/01 New 146-4080 Digital Multimeter Available For Troubleshooting Electronic Circuits{0115}

1998/12/01 New Rear Oil Cooler Bonnet{1378}

1998/12/01 New Turbocharger Supply Tube Assemblies Used{1307}

1999/01/01 On-Highway Heavy Duty 1999 Model Year Truck Electronic System{1900}

1999/01/01 On-Highway Heavy Duty 1999 Model Year Truck Software Release{1920}

1999/01/01 Caterpillar Driver Information Display (Cat ID) Version 2.0 Release For On-Highway Truck{1920}

1999/01/01 New Two-Piece Spool And Diaphragm For BrakeSaver Control Valve Now Used{1155}

1999/01/01 Use 144-0235 Belt Tension Gauge To Check Belt Tension{7461,1357}

1999/02/01 Installation Procedure For Hydraulic Electronic Unit Injector (HEUI) Oil Pump High Pressure Oil Line{1714}

1999/02/01 Air Compressor Drive Gear Holding Tool Available{0700,1803}

1999/03/01 Optional 4-Pin Coolant Level Sensor {1395}

1999/03/01 70-Pin Breakout "T" Harness For The ADEM 2000 Truck Engine ECM {1901}

1999/03/01 Troubleshooting Guide Corrections {0350}

1999/03/01 Use 145-5247 And 147-2675 Wear Sleeve Installer To Install Crankshaft Wear Sleeves {1202}

1999/03/01 Create And Save The ECM Customer Parameters List As A Back-Up {1901}