Use 145-9342 Filter Crusher To Reduce Waste And Collect Oil{5720}
Usage:
All Models
Warranty Category: G
Features/Benefits
-
- * Reduces used filters by approximately 80%
- * Crushes up to 120 filters per hour
- * Disposal container holds 2 to 3 times more crushed filters (reduces disposal cost)
- * Squeezes oil into a 55 gallon collection drum (recycled oil can be used or sold for heating)
- * Heavy-duty construction for durability and long life
- * Two-lever operation (safe and easy)
- * Works on most common sizes of filters
- * Reduces used filters by approximately 80%
NOTE: Do not crush fuel filters with this machine.
Specifications/Technical Information
- Overall size (h x w x l) - 290 x 91 x 102 cm (116.0 x 36.0 x 40.0 in)
- Containment opening size (h x w) - 43 x 23 cm (13.5 x 9.0 in)
- Maximum filter crushing area (h x dia.) - 58 x 24 cm (23.0 x 9.3 in)
- Cycle time up and down (no filter) - 19 seconds
- Cycle time up and down with typical filter - 26 seconds
- Crushing force - 27 metric tons (30 tons)
- Motor size - 5.6 kW (7.5 hp)
- Electrical requirements - 220/440 volt, 3 phase
- Used oil container (not included) - 208 L (55 gal)
- Containment opening size (h x w) - 43 x 23 cm (13.5 x 9.0 in)
Caterpillar Information System:
1998/12/01 Use 9U-5968 Hydrostatic Filter Group To Filter Contaminated Oil{5050,3200,3218}
1998/12/01 Use 139-2610 Or 139-2611 (CE Certified) Refrigerant Identification Instrument To Determine Refrigerant Content{1809}
1998/12/01 Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps Installation{1251,1251,1000}
1998/12/01 Use 131-5050 DataView Group And 131-5051 DataView Portable TechStation Group For Accurate Diagnostics{1000,3000,4000,5000,6000,0788}
1998/12/01 Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView{1000,3000,4000,5000,6000}
1998/12/01 Use 149-5138 Mechanical Push/Puller For Extra Force In General Purpose Applications{0700}
1998/12/01 New 146-4080 Digital Multimeter Available For Troubleshooting Electronic Circuits{0115}
1998/12/01 New Rear Oil Cooler Bonnet{1378}
1998/12/01 New Turbocharger Supply Tube Assemblies Used{1307}
1998/12/01 Eliminate Possibility Of Engine Oil Leaks From Oil Pan Bolt{1302}
1998/12/01 New Unit Injector Sleeve And O-Ring Seals{1125}
1998/12/01 New Adjustment Procedure For Jake Brake (Models 340/340A/340B) Slave Piston Lash{1119}
1999/01/01 Electronic Controller Analyzer Programmer (ECAP) Truck SPM Version 2.3 Update{1920}
1999/01/01 Electronic Technician (ET) Version 2.3 Update{1920}
1999/01/01 Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01 On-Highway Heavy Duty 1999 Model Year Truck Electronic System{1900}
1999/01/01 On-Highway Heavy Duty 1999 Model Year Truck Software Release{1920}
1999/01/01 Caterpillar Driver Information Display (Cat ID) Version 2.0 Release For On-Highway Truck{1920}
1999/01/01 New Two-Piece Spool And Diaphragm For BrakeSaver Control Valve Now Used{1155}
1999/01/01 Use 144-0235 Belt Tension Gauge To Check Belt Tension{7461,1357}
1999/02/01 Installation Procedure For Hydraulic Electronic Unit Injector (HEUI) Oil Pump High Pressure Oil Line{1714}
1999/02/01 Air Compressor Drive Gear Holding Tool Available{0700,1803}
1999/03/01 Optional 4-Pin Coolant Level Sensor {1395}
1999/03/01 70-Pin Breakout "T" Harness For The ADEM 2000 Truck Engine ECM {1901}