1998/10/01 Caterpillar


New Cast Iron Valve Guide{1104}

Usage:


3306C (9TL20504-UP) Truck Engines

Description of Change: New threaded cast iron valve guides are now used in these truck engines

Adaptable To: The new 162-1589 Valve Guide (cast iron) replaces the former 109-0390, 116-7553, and 148-7502 Valve Guides (powered metal type). The new 162-1589 Valve Guide (cast iron) also replaces 148-7425 Valve Guide (cast iron). The new 162-1589 Valve Guide (cast iron) may be used with any 3300 exhaust valve, but in order to obtain reduced valve guide wear, the 148-7455 Exhaust Valve (chrome plated stem) should be matched with the new 162-1589 Valve Guide.

Caterpillar Information System:

1998/10/01 New Exhaust Valve With Chrome Plated Stem Reduces Intermittant Exhaust Valve Sticking{1105}
1998/09/01 New Flywheel Housing Gasket Used {1157}
1998/09/01 Be Sure To Heat The Gear To The Correct Temperature When Installing The Crankshaft Gear {1204}
1998/09/01 Troubleshooting The 5 Volt Sensors {1900,1906,1917,1921,1922,1923,1924,1928}
1998/09/01 New Basic Water Pumps Groups Used In Engine Water Pump Groups {1361}
1998/09/01 "Programming Cat Electronic Truck Engines" Update {1920}
1998/09/01 Flash File Bulletin Board System To Be Discontinued {1920}
1998/09/01 Troubleshooting Reminder For Low Power Or Intermittent Low Power Symptoms {1250,1252,1256,1260,1261,1273}
1998/08/01 Lower O-Ring Seal Removed From Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Groups{1290}
1998/08/01 Prevention Of Air Cleaner Contamination On 1997 And 1998 GMC T-Series Tilt Cab Trucks Powered By 3116 (8WL, 2CW) And 3126B (7AS) Truck Engines{1051}
1998/06/01 New Flywheel Housing Gasket Used{1157}
1998/06/01 Be Sure To Order The Correct Remanufactured Cylinder Head For 3406E (5EK, 6TS) Truck Engines{1100}
1998/10/01 New Rocker Arms And Valve Adjusting Screw{1123}
1998/10/01 New Fuel Priming Pump Assembly Used{1258}
1998/11/01 New Full Feature Electronic Control Group [Electronic Control Module (ECM)] Available {1901}
1998/11/01 New Refrigerant Compressor Support Bracket Assemblies Available {1162,1802}
1998/11/01 Be Sure To Use Correct Stub Shaft When Replacing Cam Idler Gear {1234,1212}
1998/11/01 New Cylinder Head, Cylinder Block, Cylinder Head Gasket, And Camshaft Followers {1100,1124,1201}
1998/11/01 Correction To Service Manual For Connecting Rod Bolt Torque {1218}
1998/11/01 Elimination Of One Hold-Down Stud For Jake Brake {1119}
1998/11/01 Elimination Of One Hold-Down Stud For Pac Brake {1119}
1998/11/01 New Oil Filter Base Elbow And O-Ring Seal Improves Sealing {1306}
1998/11/01 Use Jet Guard And Long John Safety Air Guns For Cleaning Engines And Equipment {0646}
1998/11/01 Use 153-9032 Portable Air Conditioning Flushing Unit To Clean Air Conditioning Lines {0714}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.