New Exhaust Valve With Chrome Plated Stem Reduces Intermittant Exhaust Valve Sticking{1105}
Usage:
3116 (2FR, 2CW),
3126 (1WM, 7LZ, 4ES, 8HW) Truck Engines
Description of Change: New exhaust valves with chrome plated stems are now used in these truck engines. The chrome plated exhaust valve stem reduces intermitted valve sticking under extreme operating conditions.
Adaptable To: The new 136-0819 Exhaust Valve (chrome plated stem) replaces the former 105-7779 Exhaust Valve. The former exhaust valve is cancelled. These changes are in effect with 3126 (1WM26473-Up) Truck Engines.
Caterpillar Information System:
1998/09/01 New Flywheel Housing Gasket Used {1157}
1998/09/01 Be Sure To Heat The Gear To The Correct Temperature When Installing The Crankshaft Gear {1204}
1998/09/01 Troubleshooting The 5 Volt Sensors {1900,1906,1917,1921,1922,1923,1924,1928}
1998/09/01 New Basic Water Pumps Groups Used In Engine Water Pump Groups {1361}
1998/09/01 "Programming Cat Electronic Truck Engines" Update {1920}
1998/09/01 Flash File Bulletin Board System To Be Discontinued {1920}
1998/09/01 Troubleshooting Reminder For Low Power Or Intermittent Low Power Symptoms {1250,1252,1256,1260,1261,1273}
1998/08/01 Lower O-Ring Seal Removed From Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Groups{1290}
1998/08/01 Prevention Of Air Cleaner Contamination On 1997 And 1998 GMC T-Series Tilt Cab Trucks Powered By 3116 (8WL, 2CW) And 3126B (7AS) Truck Engines{1051}
1998/06/01 New Flywheel Housing Gasket Used{1157}
1998/06/01 Be Sure To Order The Correct Remanufactured Cylinder Head For 3406E (5EK, 6TS) Truck Engines{1100}
1998/06/01 Individual Parts For The Exhaust Joint Are Now Available{1059}
1998/10/01 New Cast Iron Valve Guide{1104}
1998/10/01 New Rocker Arms And Valve Adjusting Screw{1123}
1998/10/01 New Fuel Priming Pump Assembly Used{1258}
1998/11/01 New Full Feature Electronic Control Group [Electronic Control Module (ECM)] Available {1901}
1998/11/01 New Refrigerant Compressor Support Bracket Assemblies Available {1162,1802}
1998/11/01 Be Sure To Use Correct Stub Shaft When Replacing Cam Idler Gear {1234,1212}
1998/11/01 New Cylinder Head, Cylinder Block, Cylinder Head Gasket, And Camshaft Followers {1100,1124,1201}
1998/11/01 Correction To Service Manual For Connecting Rod Bolt Torque {1218}
1998/11/01 Elimination Of One Hold-Down Stud For Jake Brake {1119}
1998/11/01 Elimination Of One Hold-Down Stud For Pac Brake {1119}
1998/11/01 New Oil Filter Base Elbow And O-Ring Seal Improves Sealing {1306}
1998/11/01 Use Jet Guard And Long John Safety Air Guns For Cleaning Engines And Equipment {0646}