1998/06/01 Caterpillar


New Guideline For Product Information, SEBF8340, " Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)" Available{0374,1250}

Usage:


New Guideline For Product Information, SEBF8340, " Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)" is available through normal literature ordering channels. This new Guideline covers misfire, low power, hard starting, and leak symptoms. Using this Guideline should help troubleshoot commonly misdiagnosed problems with fuel nozzles, pumps, and governors. The new Guideline includes a Customer Interview (that can be used as a guide to help determine customer's complaint) and Flow Charts that can be used to determine the probable cause of the complaint. This document is not intended to serve as an all-inclusive Troubleshooting Guide, but rather as a supplement to the SENR6521 and SENR6522 Engine Troubleshooting Guides or the Service Manual troubleshooting section.

Caterpillar Information System:

1998/06/01 New Longer V-Belt Used For 3126 Truck Engines{1357}
1998/06/01 Cooling System Improved{1350}
1998/06/01 Correct Location For Pressure Tap To Measure Exhaust Backpressure{1061}
1998/05/01 Proper Welding Procedure On Truck Engines With Electronic Controls{1400}
1998/05/01 New Software Released{1920}
1998/05/01 Do Not Reuse The Spring Washers That Are Between The Front Cover And Front Plate On Some 3406E Truck Engines{1162}
1998/05/01 Do NOT Interchange Electrical Stators Between Electronic Unit Injectors (EUIs) {1290}
1998/05/01 New Gear Assembly And Stub Shaft Used In Front Gear Group{1206}
1998/05/01 Jacobs® Exhaust Brake Slave Piston Clearance Settings Changed For 1998 C-12 (9NS) Truck Engines{1119}
1998/05/01 New Valve Cover Seal Used{1107}
1998/05/01 New Cast Iron Valve Guide And New Exhaust Valve With Chrome Plated Stem Will Help Prevent Early Hour Exhaust Valve Sticking{1104,1105}
1998/05/01 Electronic Technician (ET) Version 2.2 And Customer ET Update{1920}
1998/06/01 New Fuel Injection Nozzle With Higher Valve Opening Pressure (VOP) Used{1254}
1998/06/01 New Basic Water Pumps Groups Used In Engine Water Pump Groups{1361}
1998/06/01 Timing Hole In Wrong Location In Allison Flexplates{1003}
1998/06/01 New Camshaft Gasket Available{1150,1151,1162,1166}
1998/06/01 Be Sure To Heat The Gear To The Correct Temperature When Installing The Crankshaft Gear{1204}
1998/06/01 Be Sure To Use The Correct Spacer With The New 152-3001 Injector Hold Down Bolt In Fuel Injection Pump Group{1290}
1998/06/01 New Water Pump Used{1350,1361}
1998/06/01 "Horton 3-Speed Fan" Feature In Heavy Duty Truck Engine Software (FEB98 Or Later){1356,1920}
1998/06/01 Individual Parts For The Exhaust Joint Are Now Available{1059}
1998/06/01 Be Sure To Order The Correct Remanufactured Cylinder Head For 3406E (5EK, 6TS) Truck Engines{1100}
1998/06/01 New Flywheel Housing Gasket Used{1157}
1998/08/01 Prevention Of Air Cleaner Contamination On 1997 And 1998 GMC T-Series Tilt Cab Trucks Powered By 3116 (8WL, 2CW) And 3126B (7AS) Truck Engines{1051}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.