2014/02/26 Caterpillar


A New Sea Water Plug and Zinc Rod Are Used On Certain C32 Marine Engines {1379}

Usage:

C32 RPM
Marine Engine:
C32 (S/N: RPM1-UP)

Description of Change: A new sea water plug and zinc rod is used on the heat exchangers of certain C32 marine engines. The new plugs and zinc rods improve commonality for easier service.

Adaptable To: Refer to Table 1 for a list of part numbers.

Table 1
New Part Number     Part Description     Former Part Number    
426-4063     Plug     5B-9169    
6L-2280     Zinc Rod     5B-9651    
This change is effective for the serial numbers listed in Table 2.

Table 2
Effective Serial Numbers    
S/N:RPM00138-UP    

Caterpillar Information System:

349F and 352F Excavators Machine System Specifications Track Adjuster
390F Excavator C18 Engine Supplement Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C3.4B Engines Glow Plug Starting Aid - Test
XQ125 Generator Set Fan Clearance - Check
C4.4 Marine Generator Set Speed/Timing - Test
349F and 352F Excavators Machine System Specifications Pilot Lines
349F and 352F Excavators Machine System Specifications Fasteners
390F Excavator C18 Engine Supplement Temperature Sensor (Catalyst Inlet) - Remove and Install
390F Excavator C18 Engine Supplement Fuel Manifold (ARD) - Remove and Install
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Hydraulic System - Health Check
390F Excavator C18 Engine Supplement Catalyst (SCR) - Remove and Install
DE Series Generator Sets With Cat C3.3 Engine Starting Motor - Inspect
C27 and C32 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
C175-16 Petroleum Generator Set Engines Centrifugal Oil Filter - Clean
The Hydraulic Tank Baffle is Failing on Certain Off-Highway Trucks{5056} The Hydraulic Tank Baffle is Failing on Certain Off-Highway Trucks{5056}
349F and 352F Excavators Machine System Specifications Boom Cylinder Lines
C4.4 Marine Generator Set Sensor Calibration Required - Test
C4.4 Marine Generator Set Aftercooler - Assemble - Air - to - Air Charge Cooler
C4.4 Marine Generator Set Aftercooler - Disassemble - Air - to - Air Charge Cooler
C4.4 Marine Generator Set Aftercooler - Assemble - Keel-cooled
C4.4 Marine Generator Set Aftercooler - Disassemble - Keel-cooled
C4.4 Marine Generator Set Aftercooler - Remove and Install - Keel-Cooled
C4.4 Marine Generator Set Air Cleaner Housing - Remove and Install
C4.4 Marine Generator Set Air Starting Motor - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.