Track Adjuster
Show/hide table
Illustration 1 | g03482659 |
Show/hide table
Item | Qty | Part | Specification Description |
1 | - | - | Prior to assembly into the track roller frame, this surface must be clean and free of protective coating. |
2 | - | - | Fill the relief holes with the 5P-0960 Grease Cartridge. |
3 | - | - | Lubricate the inside diameter of the cylinder and the seal grooves in the cylinder with the 5P-0960 Grease Cartridge. |
4 | 1 | 2S-5926 Relief Valve | Torque to |
5 | 1 | 357-7540 Fill Valve | Torque to |
B | 1 | 093-1437 Lip Type Seal | Installation depth is |
6 | - | 297-9157 Piston | Lubricate the outside diameter of the piston and the seal grooves in the piston with the 5P-0960 Grease Cartridge. |
Caterpillar Information System:
390F Excavator C18 Engine Supplement Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C3.4B Engines Glow Plug Starting Aid - Test
XQ125 Generator Set Fan Clearance - Check
C4.4 Marine Generator Set Speed/Timing - Test
349F and 352F Excavators Machine System Specifications Pilot Lines
349F and 352F Excavators Machine System Specifications Fasteners
390F Excavator C18 Engine Supplement Temperature Sensor (Catalyst Inlet) - Remove and Install
390F Excavator C18 Engine Supplement Fuel Manifold (ARD) - Remove and Install
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Hydraulic System - Health Check
390F Excavator C18 Engine Supplement Catalyst (SCR) - Remove and Install
DE Series Generator Sets With Cat C3.3 Engine Starting Motor - Inspect
DE Series Generator Sets With Cat C3.3 Engine Fuel System Secondary Filter - Replace
2014/02/26 A New Sea Water Plug and Zinc Rod Are Used On Certain C32 Marine Engines {1379}
C27 and C32 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
C175-16 Petroleum Generator Set Engines Centrifugal Oil Filter - Clean
The Hydraulic Tank Baffle is Failing on Certain Off-Highway Trucks{5056} The Hydraulic Tank Baffle is Failing on Certain Off-Highway Trucks{5056}
349F and 352F Excavators Machine System Specifications Boom Cylinder Lines
C4.4 Marine Generator Set Sensor Calibration Required - Test
C4.4 Marine Generator Set Aftercooler - Assemble - Air - to - Air Charge Cooler
C4.4 Marine Generator Set Aftercooler - Disassemble - Air - to - Air Charge Cooler
C4.4 Marine Generator Set Aftercooler - Assemble - Keel-cooled
C4.4 Marine Generator Set Aftercooler - Disassemble - Keel-cooled
C4.4 Marine Generator Set Aftercooler - Remove and Install - Keel-Cooled
C4.4 Marine Generator Set Air Cleaner Housing - Remove and Install