Fasteners
Show/hide table
Illustration 1 | g03859679 |
Top view Typical example |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
1 | - | - | Before assembly, the surfaces must be clean and free from protective coating. |
2 | 40 | 509-7907 Bolt | Before assembly, remove compound, oil and dust from female threads, then apply Loctite 243 to the threads.
Use the following tightening procedure: 1. Tighten bolts to 2. Turn to an additional angle of 45 ± 5 degrees. |
Caterpillar Information System:
390F Excavator C18 Engine Supplement Temperature Sensor (Catalyst Inlet) - Remove and Install
390F Excavator C18 Engine Supplement Fuel Manifold (ARD) - Remove and Install
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Hydraulic System - Health Check
390F Excavator C18 Engine Supplement Catalyst (SCR) - Remove and Install
DE Series Generator Sets With Cat C3.3 Engine Starting Motor - Inspect
DE Series Generator Sets With Cat C3.3 Engine Fuel System Secondary Filter - Replace
DE Series Generator Sets With Cat C3.3 Engine Fuel System Primary Filter/Water Separator - Drain
DE Series Generator Sets With Cat C3.3 Engine Fuel System Primary Filter (Water Separator) Element - Replace
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Hoses and Clamps - Inspect/Replace
DE Series Generator Sets With Cat C3.3 Engine Fuel System - Prime
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Fuel Tank Water and Sediment - Drain
DE Series Generator Sets With Cat C3.3 Engine Engine Oil and Filter - Change
349F and 352F Excavators Machine System Specifications Pilot Lines
C4.4 Marine Generator Set Speed/Timing - Test
XQ125 Generator Set Fan Clearance - Check
C3.4B Engines Glow Plug Starting Aid - Test
390F Excavator C18 Engine Supplement Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
349F and 352F Excavators Machine System Specifications Track Adjuster
2014/02/26 A New Sea Water Plug and Zinc Rod Are Used On Certain C32 Marine Engines {1379}
C27 and C32 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
C175-16 Petroleum Generator Set Engines Centrifugal Oil Filter - Clean
The Hydraulic Tank Baffle is Failing on Certain Off-Highway Trucks{5056} The Hydraulic Tank Baffle is Failing on Certain Off-Highway Trucks{5056}
349F and 352F Excavators Machine System Specifications Boom Cylinder Lines
C4.4 Marine Generator Set Sensor Calibration Required - Test