349F and 352F Excavators Machine System Specifications Caterpillar


Pilot Lines

Usage:

352F-VG A9J


Illustration 1g03608916

Table 1
Item  Qty  Part  Specification Description 
7K-1181 Cable Strap  Sharp corners at each strap cutting edge shall not be allowed. 
278-6495 Hose As  Torque to 76 ± 4 N·m (56 ± 3 b ft)
8T-4908 Bolt  Torque to 26 ± 3 N·m (230 ± 27 lb in)
164-5567 Quick Disconnect Coupler As  Torque to 31 ± 3 N·m (274 ± 27 lb in)
148-8358 Elbow As  Torque to 70 ± 7 N·m (52 ± 5 lb ft)
148-8372 Elbow As  Torque to 70 ± 7 N·m (52 ± 5 lb ft)
164-5590 Fluid Sampling Valve Gp  Torque to 14.5 ± 1.5 N·m (128.3 ± 13.3 lb in)
148-8364 Elbow As  Torque to 41 ± 4 N·m (30 ± 3 lb ft)
302-9565 Hose As  Torque to 76 ± 4 N·m (56 ± 3 b ft)
10  164-6872 Tee As  Torque to 70 ± 7 N·m (52 ± 5 lb ft)

Caterpillar Information System:

349F and 352F Excavators Machine System Specifications Fasteners
390F Excavator C18 Engine Supplement Temperature Sensor (Catalyst Inlet) - Remove and Install
390F Excavator C18 Engine Supplement Fuel Manifold (ARD) - Remove and Install
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Hydraulic System - Health Check
390F Excavator C18 Engine Supplement Catalyst (SCR) - Remove and Install
DE Series Generator Sets With Cat C3.3 Engine Starting Motor - Inspect
DE Series Generator Sets With Cat C3.3 Engine Fuel System Secondary Filter - Replace
DE Series Generator Sets With Cat C3.3 Engine Fuel System Primary Filter/Water Separator - Drain
DE Series Generator Sets With Cat C3.3 Engine Fuel System Primary Filter (Water Separator) Element - Replace
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Hoses and Clamps - Inspect/Replace
DE Series Generator Sets With Cat C3.3 Engine Fuel System - Prime
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Fuel Tank Water and Sediment - Drain
C4.4 Marine Generator Set Speed/Timing - Test
XQ125 Generator Set Fan Clearance - Check
C3.4B Engines Glow Plug Starting Aid - Test
390F Excavator C18 Engine Supplement Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
349F and 352F Excavators Machine System Specifications Track Adjuster
2014/02/26 A New Sea Water Plug and Zinc Rod Are Used On Certain C32 Marine Engines {1379}
C27 and C32 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
C175-16 Petroleum Generator Set Engines Centrifugal Oil Filter - Clean
The Hydraulic Tank Baffle is Failing on Certain Off-Highway Trucks{5056} The Hydraulic Tank Baffle is Failing on Certain Off-Highway Trucks{5056}
349F and 352F Excavators Machine System Specifications Boom Cylinder Lines
C4.4 Marine Generator Set Sensor Calibration Required - Test
C4.4 Marine Generator Set Aftercooler - Assemble - Air - to - Air Charge Cooler
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.