1995/12/15 Caterpillar


Rocker Arm Modification To Provide Increased Lubrication To Camshaft Roller Followers (Valve Lifters) {1209}

Usage:


3306C (7RJ, 9TL) Truck Engines

This modification is recommended for 3306C Truck Engines equipped with roller type valve lifters. If there is any kind of repair that requires the removal of the rocker arm assembly, OR if there is any kind of abnormal noise caused by the valve lifters, a groove can be machined into the rocker arms as shown in the illustration. The added groove intersects the oil supply hole in the rocker arm and allows additional oil to flow to the valve lifter bore in the cylinder block. This additional oil will provide improved lubrication for the valve lifters.


Location of the 1.5 to 2.0 mm (.06 to .08 in) deep groove to be machined into the rocker arm.

Caterpillar Information System:

1995/12/15 New Valve Guides Available {1104}
1995/12/15 Mechanical Unit Injector Identification Code {1290}
1995/12/15 Correct Valve Rocker Arm And Valve Push Rod Combinations {1123,1208}
1995/11/28 The Technical Information Feedback System Form Is Available In Electronic Mail{0374}
1995/11/28 122-1649 Oil Pressure Sensor Kit Available{1924}
1995/11/28 Block Mounted Breather Provides Lower Overall Engine Height{1317}
1995/11/28 Timing Procedure Aid{1206,1162,1166}
1995/11/28 New Intake And Exhaust Valves Have Chrome Plated Stems{1105}
1995/11/28 Possible Sources Of High Crankcase Blowby From Breather Tube{1317}
1995/11/28 New O-Ring Seal Used On Unit Injector Tip{1290}
1995/10/01 Oil Level Gauge (Dipstick) Calibration{1326}
1995/10/01 New Fuel Injection Nozzles Help Reduce White Exhaust Smoke During Cold Engine Start Up{1254}
1995/12/15 Engine Replacement {1000}
1995/12/15 New Stronger Elbow Used In Turbocharger Oil Lines Groups {1307}
1995/12/15 Software Update May Be Required When Changing Fuel Injectors {1900,1902,1290}
1995/12/15 Flashing 3176B And 3406E Personality Modules With NOV95 Software {1901}
1996/01/23 Mixing Caterpillar Long Life Coolant/Antifreeze (LLCA) With Conventional Cat Diesel Engine Antifreeze/Coolant And/Or Other Commercially Available Diesel Engine Antifreeze/Coolants Is Not Recommended{1395}
1996/01/23 Caterpillar Electronic Technician (CAT ET){0700}
1996/01/23 New Valve Cover Gasket{1107}
1996/01/23 Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23 New Air Fuel Ratio Control (FARC) Air Line Routing For 3306 Truck Engines In Kenworth Trucks{1278}
1996/01/23 Governor Spring Guide Press Depth{1287,1284}
1996/01/23 Remanufactured Product Update{7754}
1996/01/23 Corrupted Fleet Trip Data{1900}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.