A New Oil Pump and Tube Assemblies Are Now Used for Certain C9 Engines {1304, 1315}
- Engine:
- C9 (S/N: X3R1-UP; C9Y1-UP; P7Z1-UP)
- Generator Set:
- C9 GEN SET (S/N: C9E1-UP; NBP1-UP)
- Industrial Engine:
- C9 INDUSTRIAL (S/N: JSC1-UP; MBD1-UP; REH1-UP; JLW1-UP)
- Marine Engine:
- C9 MARINE (S/N: C9B1-UP; CSN1-UP; X9X1-UP; X9Y1-UP)
- Petroleum Engine:
- C9 PETROLEUM (S/N: P9L1-UP; KLW1-UP; P9W1-UP; KLX1-UP)
- Petroleum Power Train Package:
- CX31-P600-C9I (S/N: PDZ1-UP)
- C9 MARINE GEN (S/N: SJB1-UP)
- C9 MARINE GS (S/N: C9A1-UP)
- TH31-C9I (S/N: PAZ1-UP)
- TH31-C9T (S/N: PAY1-UP)
Description of Change: The new oil pump and lines group being used are more robust extending the service life of the lubrication system.
Adaptable To: The 396-6022 Gerotor Pump can be used on the C9 commercial engines. Replace the previous oil pump with the 396-6022 Gerotor Pump, the 281-2210 Outlet Elbow, and the appropriate tube assembly. Table 1 contains the previous and new part numbers.
Refer to Disassembly and Assembly, RENR9579, "Engine Oil Pump - Remove" and Disassembly and Assembly, RENR9579, "Engine Oil Pump - Install" for installation instructions.
Show/hide table
New Part Number     | Part Description     | Previous Part Number     |
---|---|---|
420-3655     | Tube As     | 213-8516     |
420-3656     | Tube As     | 213-1916     |
420-3657     | Tube As     | 212-7799     |
420-3658     | Tube As     | 331-8059     |
420-3659     | Tube As     | 264-0160     |
396-6022     | Gerotor Pump     | 331-8906     |
Caterpillar Information System:
2013/12/18 New Insulation Design Is Used On SCR Retrofit Aftertreatment Systems {1067}
303.5E2 CR, 304E2 CR, 304.5E2 XTC, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Line)
C4.4 Marine Generator Set Safety Messages
G3500H 60Hz Generator Sets Rotating Rectifier - Check
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Winding Insulation - Test
G3500H 60Hz Generator Sets Generator Set Alignment - Check - Generator Sets
G3512 Generator Set Generator Bearing - Lubricate
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Bearing - Inspect
G3500H 60Hz Generator Sets Generator - Dry
797F and 797F XQ Off-Highway Truck/Tractor Braking System Valve (Unloader)
G3500H 60Hz Generator Sets Coolant (NGEC) - Change
G3500 Engines System Pressure Release
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
330F MHPU Mobile Hydraulic Power Unit Machine System Cab Lighting
G3600 A4 Engines Engine Cranks but Does Not Start
C4.4 Marine Generator Set Mounting and Dismounting
G3600 A4 Engines Engine Stalls Immediately After Starting
G3600 A4 Engines Exhaust Emission and Fuel Consumption Are High
Three60 Precision Control System Event Codes
C280-08 Tier 4 Engine Nitrogen Oxide Sensor (Exhaust Outlet) - Remove and Install
C280-08 Tier 4 Engine Temperature Sensor (Exhaust Outlet) - Remove and Install
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057} Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Inspecting the Grease Chute On Certain 3000 Frame Generator Sets{4459, 5258} Inspecting the Grease Chute On Certain 3000 Frame Generator Sets{4459, 5258}
CG137-12 Petroleum Generator Set Engine Housing (Front)