Nitrogen Oxide Sensor (Exhaust Outlet) - Remove and Install
- Turn the engine OFF.
Show/hide table
Illustration 1 g03559757 - Remove bolts (2) and cover (1).
Show/hide table
Illustration 2 g03559758 - Disconnect harness assembly (6). Remove cable straps (3). Remove bolts (4) and remove harness assembly (5) from the sensor box.
Show/hide table
Illustration 3 g03559759 - Remove nitrogen oxide sensor (7).
- Install nitrogen oxide sensor (7) in the reverse order of removal.
- Tighten nitrogen oxide sensor (7) to a torque of
50 ± 10 N·m (37 ± 7 lb ft) . - Do not insulate over nitrogen oxide sensor (7).
- Tighten nitrogen oxide sensor (7) to a torque of
Caterpillar Information System:
Three60 Precision Control System Event Codes
G3600 A4 Engines Exhaust Emission and Fuel Consumption Are High
G3600 A4 Engines Engine Stalls Immediately After Starting
C4.4 Marine Generator Set Mounting and Dismounting
G3600 A4 Engines Engine Cranks but Does Not Start
330F MHPU Mobile Hydraulic Power Unit Machine System Cab Lighting
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
2013/12/23 A New Oil Pump and Tube Assemblies Are Now Used for Certain C9 Engines {1304, 1315}
2013/12/18 New Insulation Design Is Used On SCR Retrofit Aftertreatment Systems {1067}
303.5E2 CR, 304E2 CR, 304.5E2 XTC, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Hydraulic System Relief Valve (Line)
C4.4 Marine Generator Set Safety Messages
G3500H 60Hz Generator Sets Rotating Rectifier - Check
C280-08 Tier 4 Engine Temperature Sensor (Exhaust Outlet) - Remove and Install
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057} Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Inspecting the Grease Chute On Certain 3000 Frame Generator Sets{4459, 5258} Inspecting the Grease Chute On Certain 3000 Frame Generator Sets{4459, 5258}
CG137-12 Petroleum Generator Set Engine Housing (Front)
CG137-12 Petroleum Generator Set Engine Exhaust Manifold - Water Cooled
CG137-12 Petroleum Generator Set Engine Coupling Fastener
G3600 A4 Engines Turbocharger Turbine Temperature Is High
C18 Marine Engine Product Lifting
G3600 A4 Engines Engine Shutdown Occurrence
C18 Marine Engine Belt Tightener - Lubricate
C18 Marine Engine Fan Drive Bearing - Lubricate
C18 Marine Engine Coolant Level - Check