Exhaust Manifold - Water Cooled
Show/hide table
 | |
| Illustration 1 | g03560936 |
Show/hide table
| Specification for 351-1916 Exhaust Manifold Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 1D-4706 Bolt | Torque to 54 ± 7 N·m (40 ± 5 lb ft). |
| 2 | 2 | 4N-5073 Elbow | Be certain that the cup plug must be removed in each cylinder head before the elbows are connected. |
| 3 | 4 | 7L-0520 Taperlock Stud | Torque to 35 ± 5 N·m (26 ± 4 lb ft). |
| 4 | 4 | 9S-8752 Full Nut | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
| 5 | 8 | 5K-5959 O-Ring Seal | Lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
Show/hide table
 | |
| Illustration 2 | g03560937 |
Tightening sequence | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 6 | 24 | 168-7800 Locknut | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
| Tighten the locknut to a torque of 38 ± 5 N·m (28 ± 4 lb ft) as per numerical sequence as shown in Illustration 2. |
Caterpillar Information System:
CG137-12 Petroleum Generator Set Engine Housing (Front)
Inspecting the Grease Chute On Certain 3000 Frame Generator Sets{4459, 5258} Inspecting the Grease Chute On Certain 3000 Frame Generator Sets{4459, 5258}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057} Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
C280-08 Tier 4 Engine Temperature Sensor (Exhaust Outlet) - Remove and Install
C280-08 Tier 4 Engine Nitrogen Oxide Sensor (Exhaust Outlet) - Remove and Install
Three60 Precision Control System Event Codes
G3600 A4 Engines Exhaust Emission and Fuel Consumption Are High
G3600 A4 Engines Engine Stalls Immediately After Starting
C4.4 Marine Generator Set Mounting and Dismounting
G3600 A4 Engines Engine Cranks but Does Not Start
330F MHPU Mobile Hydraulic Power Unit Machine System Cab Lighting
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
CG137-12 Petroleum Generator Set Engine Coupling Fastener
G3600 A4 Engines Turbocharger Turbine Temperature Is High
C18 Marine Engine Product Lifting
G3600 A4 Engines Engine Shutdown Occurrence
C18 Marine Engine Belt Tightener - Lubricate
C18 Marine Engine Fan Drive Bearing - Lubricate
C18 Marine Engine Coolant Level - Check
2014/08/27 A New Catalytic Converter Group Is Used on Certain 3516C HD Tier 4 Interim Generator Sets {1091}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077} Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
320D2 and 323D2 Excavators Machine Systems Specifications Counterweight
320 GC, 320 and 323 Excavator Machine Systems Specifications Final Drive
336F XE Excavator Machine System Specifications Relief Valve (Line)