Housing (Front)
Show/hide table
 | |
| Illustration 1 | g03560736 |
Show/hide table
| Specification for 351-1940 Front Housing Gp | |||
| Item | Qty | Part | Specification Description |
| During assembly, the rear face of the housing and the front face of the cylinder block must be free from the following substance. Oil, fuel, water, dirt, assembly compound, and any other contaminants. | |||
| 1 | 1 | 166-9145 Cylinder Block Gasket | After assembly, trim the cylinder block gasket with face (5) of the housing. |
| 2 | - | - | Apply ultra black 4C-9612 Silicone Sealant to fill the space at the cylinder block, front housing, and the oil pan joint. |
Caterpillar Information System:
Inspecting the Grease Chute On Certain 3000 Frame Generator Sets{4459, 5258} Inspecting the Grease Chute On Certain 3000 Frame Generator Sets{4459, 5258}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057} Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
C280-08 Tier 4 Engine Temperature Sensor (Exhaust Outlet) - Remove and Install
C280-08 Tier 4 Engine Nitrogen Oxide Sensor (Exhaust Outlet) - Remove and Install
Three60 Precision Control System Event Codes
G3600 A4 Engines Exhaust Emission and Fuel Consumption Are High
G3600 A4 Engines Engine Stalls Immediately After Starting
C4.4 Marine Generator Set Mounting and Dismounting
G3600 A4 Engines Engine Cranks but Does Not Start
330F MHPU Mobile Hydraulic Power Unit Machine System Cab Lighting
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
2013/12/23 A New Oil Pump and Tube Assemblies Are Now Used for Certain C9 Engines {1304, 1315}
CG137-12 Petroleum Generator Set Engine Exhaust Manifold - Water Cooled
CG137-12 Petroleum Generator Set Engine Coupling Fastener
G3600 A4 Engines Turbocharger Turbine Temperature Is High
C18 Marine Engine Product Lifting
G3600 A4 Engines Engine Shutdown Occurrence
C18 Marine Engine Belt Tightener - Lubricate
C18 Marine Engine Fan Drive Bearing - Lubricate
C18 Marine Engine Coolant Level - Check
2014/08/27 A New Catalytic Converter Group Is Used on Certain 3516C HD Tier 4 Interim Generator Sets {1091}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077} Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
320D2 and 323D2 Excavators Machine Systems Specifications Counterweight
320 GC, 320 and 323 Excavator Machine Systems Specifications Final Drive